per
مرکز پژوهش کیفیت و بهرهوری پارسیان
نشریه علمی پژوهشی مهندسی و مدیریت کیفیت
2322-1305
2019-12-22
9
4
284
294
122463
Original Article
طراحی آماری ـ اقتصادی نمودارهای کنترلی برای پایش میانگین فرایند با انحراف معیار معلوم بر اساس چگالی پیشگوی بیزی
Economic-Statistical Design of Control Charts for monitoring the Process Mean with Known Standard Deviation Based on Bayesian Predictive Distribution
عاطفه مرادیان
atefemoradian72@gmail.com
1
محمد بامنی مقدم
bamenimoghadam@atu.ac.ir
2
سید رحمت شجاعی علی آبادی
shojaei_ut@yahoo.com
3
دانشگاه علامه طباطبائی
دانشگاه علامه طباطبائی
دانشگاه علامه طباطبائی
در زمینهی کنترل فرایند آماری تحقیقات گستردهای انجام شده است. همچنین اخیراً در متون کنترل فرایند آماری، نمودارهای کنترلی پیشنهاد شدهاند که مبتنی بر ایده چگالی پیشگوی بیزی هستند. این ایده اولین بار توسط منزفریخ مطرح و در آن نامعلومی پارامترها در نظر گرفته شد.. در این مقاله برای اولین بار طراحی آماری ـ اقتصادی نمودارهای کنترلی برای پایش میانگین فرایند با انحراف معیار معلوم بر اساس چگالی پیشگوی بیزی ارائه شده است. با توجه به نتایج ارائه شده در مقاله، در خصوص برتری طراحی آماری ـ اقتصادی بر طراحی اقتصادی و همچنین برتری رویکرد بیزی بر رویکرد کلاسیک در طراحی نمودار کنترلی، پیشنهاد میشود که از نمودار کنترلی بیزی با طراحی آماری ـ اقتصادی در کنترل میانگین فرایند استفاده شود.
Extensive research has been done in the field of statistical process control. Also recently, control charts based on the Bayesian predictive distribution idea have been proposed in statistical process control texts. This idea was first proposed by Menzefricke and its parameters were considered unknown. In this paper, for the first time, statistical-economic design of control charts for monitoring the process mean with known standard deviation based on Bayesian predictive distribution is presented. According to the results presented in the article, regarding the superiority of statistical-economic design over economic design and also the superiority of Bayesian approach over the classical approach in designing control charts, it is suggested to use Bayesian control chart with statistical-economic design in controlling the process mean.
https://www.pqprc.ir/article_122463_24c2c19e1bd2f2b6ec0fd80caf291c46.pdf
کنترل کیفیت
طراحی آماری ـ اقتصادی
نمودار کنترلی
رویکرد بیزی
Quality Control
Economic-Statistical Design
Control chart
Bayesian approach
per
مرکز پژوهش کیفیت و بهرهوری پارسیان
نشریه علمی پژوهشی مهندسی و مدیریت کیفیت
2322-1305
2019-12-22
9
4
295
304
107870
Original Article
شبیهسازی اثر شلاقی چندمرحلهای در زنجیرهی تأمین چندمحصولی و چندسطحی
Simulation of a Multi-Stage Whip Effect in a Multi-Product and Multi-Level Supply Chain
دکتر محمد مهدی موحدی
mmmovahedi@gmail.com
1
سیداحمد شایان نیا
sheibat@yahoo.com
2
حامد یوسف نژاد
isiranbabol@yahoo.com
3
مدیریت صنعتی، گروه مدیریت صنعتی، دانشگاه آزاد اسلامی واحد فیروزکوه،فیروزکوه، ایران
گروه مدیریت صنعتی، واحد فیروزکوه، دانشگاه آزاد اسلامی، فیروزکوه، ایران
گروه مدیریت صنعتی، واحد فیروزکوه، دانشگاه آزاد اسلامی، فیروزکوه، ایران
برای بهینه بودن زنجیره تأمین باید نظام منسجم و پویایی وجود داشته باشد. شناخت فرایندهای تأمین قطعات، طراحی، مطالعات مربوط و امثال آن، و به کارگیری روشهای کارا برای مدیریت آنها میتوانند اثربخش باشد. هدف این تحقیق بررسی تشدید اثر شلاقی، یعنی تغییرات تقاضای مشتری در زنجیرهی تأمین چندمحصولی و چندسطحی است. در این مقاله مدلهای موجودی، ارتباطی و مشارکتی برای محاسبه اثر شلاقی طراحی گردیدند. برای شبیهسازی اثر شلاقی این مدلها از برنامه متلب ANFIS برای ورود اطلاعات و محاسبه اثر شلاقی استفاده شده است. نتایج نشان میدهند که برای هر دو عامل تولیدکننده و توزیع کننده سطح اثر شلاقی برای دو محصول موزد مطالعه به میزان قابل توجهی کاهش یافته است. نتیجهی بخش تطبیق مشارکتهای واحد زنجیره تأمین در طول کل زنجیره تأمین نشان میدهد که لزومی ندارد اندازهی واحدهای ارسالی محصول به توزیع کنندگان، در صورت کاهش موجودی آنها تغییر پیدا کند .
The purpose and background of this research is to investigate the intensification of changes in demand from the customer to the manufacturer. A beverage factory with two products whose production reaches distributors in different ways was studied. Inventory, communication and participatory models were designed to calculate the whipping effect. Communication and participatory models were also written with the ANFIS MATLAB program to enter information and calculate the whipping effect. For the producer factor, the level of the whip effect has decreased by an average of 22.31%, which is 33.33% for product A and 1.97% for product B. The results shown in the study show an appropriate reduction in the level of the whip effect. For distributors, there is an average decrease of 92.17%. For the producer factor, the level of the whip effect has decreased by an average of 22.31%.
https://www.pqprc.ir/article_107870_d6651ad2dbcfcccb6106fb759b4f6d2d.pdf
اثر شلاقی
زنجیرههای تأمین چندمحصولی
زنجیرههای تأمین چندسطحی و چندمرحلهای
whip effect
multi-product supply chains
multi-level and multi-stage supply chains
per
مرکز پژوهش کیفیت و بهرهوری پارسیان
نشریه علمی پژوهشی مهندسی و مدیریت کیفیت
2322-1305
2019-12-22
9
4
305
319
107871
Original Article
طراحی شبکه زنجیره تأمین چند هدفه ،حلقه بسته سبز و چابک به کمک الگوریتم فراابتکاری علفهای هرز چند هدفه
Multi-Objective Green Agile Closed Loop Supply Chain Network Design Using Multi-objective Weed Optimization Algorithm
مهدی داستانی
dastani33@yahoo.com
1
سید محمدرضا داودی
smrdavoodi@ut.ac.ir
2
مهدی کرباسیان
mkarbasian@yahoo.com
3
شهرام معینی
sh.moeeni@ase.ui.ac.ir
4
دانشجوی دکتری مدیریت صنعتی، دانشکده مدیریت، واحد اصفهان( خوراسگان)، دانشگاه آزاد اسلامی، اصفهان، ایران.
استادیار، گروه مدیریت، واحد دهاقان، دانشگاه آزاد اسلامی، دهاقان، ایران
دانشکده مهندسی صنایع، دانشگاه صنعتی مالک اشتر، اصفهان، ایران
استادیار، گروه اقتصاد، دانشکده امور اداری و اقتصاد، دانشگاه اصفهان، اصفهان، ایران.
تغییرات در بازار و نیاز مشتریان یکی از مهمترین موضوعات و چالشهای مدیران زنجیره تأمین میباشد. چابکی مفهومی است که اخیرا توسط محققان حوزه زنجیره تأمین به منظور طراحی هرچه بهتر زنجیره تأمین ارایه شده است. از طرفی دیگر توجه به مشکلات زیست محیطی موضوع دیگری است که زنجیرهها تلاش دارند با تمرکز بر این حوزه، مقبولیت خود را افزایش دهند. با توجه به اهمیت موضوع، در این تحقیق به طراحی چند هدفه شبکه زنجیره تأمین حلقه بسته به همراه یکپارچهسازی مفاهیم سبز و چابک پرداخته شده است. در این راستا، یک مدل ریاضی با اهداف اقتصادی، زیست محیطی و چابکی ارائه شده است. به منظور حل این مدل ریاضی، دو روش محدودیت اپسیلون و علفهای هرز چند هدفه ارائه شده است. نتایج مقایسات انجام شده بین این روشها نشان میدهد که الگوریتم علفهای هرز عملکرد مناسبی از نظر شاخصهای مختلف کیفیت و پراکندگی مرز پارتو داشته است. در پایان، مطالعه موردی زنجیره تأمین محصولات لبنی شرکت دالان کوه تشریح شده و جوابهای بهینه حاصل از به کارگیری الگوریتم علفهای هرز چند هدفه ارایه گردیده است.
Success in supply chain implementation depends on how it operates in the face of market changes and customer needs. Agility is a concept recently introduced by supply chain researchers to better design supply chains. Accordingly, and considering the importance of the topic. In this research, the design of Multi-objective closed-loop supply chain network is discussed. Accordingly, and considering the importance of the subject, in this research, the design of Multiobjective closed-loop supply chain network is discussed. The main innovation of this research is the integration of green and agile concepts in supply chain design. To this purpose, a mathematical model with economic, environmental and agility objectives is presented. In order to solve this mathematical model, two methods of Epsilon constraint and Multi-objective weed optimization are proposed. The results of the comparisons between the two methods show that the weed algorithm performs well in terms of different Pareto boundary quality and dispersion indices. At the end, the results are presented for a case study of the Dalan Kuh dairy supply chain and the Pareto border is described.
https://www.pqprc.ir/article_107871_9268e2c0567e9fe12279cdd6f8969669.pdf
زنجیره تأمین سبز حلقه بسته
روش محدودیت اپسیلون
الگوریتم علفهای هرز چند هدفه
مرز پارتو
Closed loop green supply chain
Epsilon constraint method
Multi-objective Weed optimization Algorithm
Pareto boundary
per
مرکز پژوهش کیفیت و بهرهوری پارسیان
نشریه علمی پژوهشی مهندسی و مدیریت کیفیت
2322-1305
2019-12-22
9
4
320
333
107872
Original Article
ارزشیابی و مقابله با ریسکهای ناشی از تصمیمگیری در فرایند ارزیابی انطباق
Assess and Address the Risks of Decision Making in the Conformity Assessment Arocess
مصطفی دستمردی
m.dastmardi@ippi.ac.ir
1
مدیر کیفیت پژوهشگاه پلیمر و پتروشیمی ایران
یک نوع خاص از ارزیابی انطباق که گاهی اوقات بازرسی نامیده میشود، جهت تعیین اینکه یک محصول الزامات معینی را برآورده میسازد، به اندازهگیری به عنوان منبع اصلی اطلاعات متکی است. در هر اندازهگیری نتیجه بهدستآمده همیشه دارای عدمقطعیت میباشد. به دلیل وجود عدمقطعیت در نتایج اندازهگیری همواره ریسک تصمیمگیری غلط در فرایند ارزیابی انطباق وجود دارد. تاکنون در خصوص نحوه ارزیابی این ریسکها مطالعات زیادی انجام شده است. در بیشتر این مطالعات به ارزیابی ریسکهای تصمیمگیری از منظر تولیدکننده با استفاده از دقت اندازهگیری و تغییرپذیری فرایند تولید پرداخته شده و مطالعات اندکی در خصوص ریسکهای تصمیمگیری از منظر مصرفکننده با در نظر گرفتن عدمقطعیت اندازهگیری و تغییرپذیری فرایند تولید انجام شده است. بر این اساس در این مقاله همراه با یک مطالعه موردی نحوه ارزیابی ریسکهای تصمیمگیری غلط از دو منظر تولیدکننده و مصرفکننده با استفاده از عدمقطعیت اندازهگیری و تغییرپذیری فرایند تولید به روش احتمال توام تشریح میشود و گزینههای مختلفی برای مقابله با این ریسکها ارائه و بررسی میشوند. نتایج این پژوهش نشان میدهد که استفاده از عدمقطعیت اندازهگیری بهجای دقت اندازهگیری در ارزیابی ریسکهای تصمیمگیری غلط، براورد واقعبینانهتری از ریسکها را ارائه میدهد و میتوان با اصلاح قواعد تصمیمگیری در فرایند ارزیابی انطباق پیامدهای ناشی از این ریسکها را تعدیل نمود.
special type of conformity assessment, sometimes called an inspection, relies on measurement as the primary source of information to determine whether a product meets certain requirements. In any measurement, the result obtained always has uncertainty. Due to the uncertainty in the measurement results, there is always the risk of making wrong decisions in the conformity assessment process. So far, many studies have been done on how to assess these risks. Most of these studies have evaluated the decision-making risks from the producer perspective using measurement accuracy and variability of the production process, and few studies on decisionmaking risks from the consumer perspective have taken into account the measurement uncertainty and variability of the production process. Accordingly, in this article, along with a case study, how to evaluate the risks of wrong decision-making from both producer and consumer perspectives using measurement uncertainty and variability of the production process by the probability method is described and various options to deal with these risks are presented and examined. The results of this study show that the use of measurement uncertainty instead of measurement accuracy in assessing wrong decision risks, provides a more realistic estimate of risks and can be adjusted by modifying the decision rules in the assessment process of compliance with the consequences of these risks.
https://www.pqprc.ir/article_107872_ed55351d7ae45693f61897b48e4654a6.pdf
ارزیابی انطباق
ریسک پذیرش و رد غلط
عدمقطعیت اندازهگیری
مقابله با ریسک
Conformity assessment
Acceptance and rejection risk
Measurement uncertainty
Risk management
per
مرکز پژوهش کیفیت و بهرهوری پارسیان
نشریه علمی پژوهشی مهندسی و مدیریت کیفیت
2322-1305
2019-12-22
9
4
334
345
107873
Original Article
توسعه یک مدل بهینهسازی جدید براساس شاخص بازده فرایند S_pk و شاخص قابلیت فرایند C_pk برای انباشتههای باز ارسالی
Developing a New Optimization Model Based on the Process Yield Index and the Process Capability Index for Resubmitted lots
سیده عاطفه بنی هاشمی
banihashemi.atefe@gmail.com
1
محمد صابر فلاح نژاد
saber9876@yahoo.com
2
دانشجوی کارشناسی ارشد مهندسی صنایع، گروه مهندسی صنایع، دانشکده فنی و مهندسی، دانشگاه یزد
دانشیار، گروه مهندسی صنایع، دانشکده فنی و مهندسی، دانشگاه یزد
طرح نمونهگیری بهمنظور پذیرش، یک ابزار مفید برای تضمین و کنترل کیفیت در صنایع است. در این مقاله، طرح نمونهگیری باز ارسالی بر اساس شاخص بازده فرایند و شاخص قابلیت فرایند با درنظر گرفتن روش حداقل زاویه توسعه داده میشود. پارامترهای طرح با کمینهکردن متوسط اندازه نمونه بازرسیشده و با در نظرگرفتن محدودیتهای مربوط به میزان نزدیکی به منحنی مشخصه عملکرد ایدئال و همچنین ریسک تولیدکننده و ریسک مصرفکننده بهطور همزمان تعیین میگردند. علاوه بر این، عملکرد طرح پیشنهادی بر اساس دو شاخص ارزیابی و با طرح یکبار نمونهگیری مقایسه میشود. نتایج تحقیق نشان میدهد که طرح پیشنهادی مبتنیبر شاخص اقتصادیتر است زیرا با افزایش شباهت منحنی OC طرح پیشنهادی به منحنی OCایدئال به متوسط اندازه نمونه کمتری نسبت به طرح پیشنهادی باز ارسالی بر اساس شاخص نیاز دارد. برای نشان دادن کاربرد طرح پیشنهادی، یک مثال عددی ارائه میشود.
Acceptance sampling plan is a useful tool for assurance and quality control in industries. In this paper, the resubmitted sampling plan is developed based on the process yield index and the process capability index by considering the minimum angle method. The plan parameters are determined by minimizing the ASN and satisfying the conformity to the ideal operating characteristic (OC) curve as well as the producer’s and customer’s risk, simultaneously. In addition, the performance of the proposed plan is evaluated on the basis of two indices and compared with the single sampling plan. The research results show that the proposed plan based on the index is more economical because by increasing the similarity of the proposed plan’s OC curve to the ideal OC curve, the proposed plan based on the index performs better than the proposed plan based on the index in terms of ASN. The applicability of the proposed sampling plan is illustrated with a numerical example.
https://www.pqprc.ir/article_107873_a3a66169766218ccce79e7cd9571502b.pdf
نمونهگیری بهمنظور پذیرش
روش حداقل زاویه
شاخص قابلیت فرایند
شاخص بازده فرایند
ریسک تولیدکننده
ریسک مصرفکننده
Keywords: acceptance sampling plan
customer's risk
Minimum angle method
Process capability index
process yield index
producer's risk
per
مرکز پژوهش کیفیت و بهرهوری پارسیان
نشریه علمی پژوهشی مهندسی و مدیریت کیفیت
2322-1305
2019-12-22
9
4
346
358
107874
Original Article
سنجش کارایی پروژههای شش سیگمای ناب در صنعت بانکداری با استفاده از رویکرد ترکیبی کارت امتیاز متوازن توسعه یافته و MCDM
Measuring the Efficiency of Lean Six Sigma (LSS) Projects in the Banking Industry Using the Hybrid Approach of Modified Balanced Scorecard (MBSC) and Multi Criteria Decision Making (MCDM)
رضا بهبود
rezabehboud@yahoo.com
1
حنا بقایی
hana.b690@gmail.com
2
عباسعلی رستگار
ar_rastgar@semnan.ac.ir
3
دانشجوی دکتری مدیریت صنعتی گرایش مدیریت سیستمها، دانشکده اقتصاد، مدیریت و علوم اداری دانشگاه سمنان، سمنان، ایران
دانشجوی دکتری مدیریت صنعتی گرایش تولید و عملیات، دانشکده مدیریت و حسابداری دانشگاه علامه طباطبایی، تهران، ایران.
دانشیار، دانشکده اقتصاد، مدیریت و علوم اداری دانشگاه سمنان، سمنان، ایران
مؤسسههای فعال در صنعت بانکداری یکی از مهمترین بخشهای ارائه دهنده خدمات اقتصادی در سراسر دنیا هستند که نقش اساسی در توسعه پایدار کشورها ایفا میکنند. شش سیگمای ناب به عنوان یک روش ترکیبی به بهبود اثربخشی و کارایی در مؤسسههای مالی کمک میکند. استفاده از کارت امتیاز متوازن و شش سیگمای ناب سه هدف همسو سازی استراتژیک، بهبود عملکرد و رضایت مشتریان را محقق میسازد. هدف از این پژوهش ارائه رویکردی ترکیبی از مدل کارت امتیاز متوازن توسعه یافته و تکنیک ویکور به منظور سنجش کارایی پروژههای شش سیگمای ناب در صنعت بانکداری است. همچنین نتایج نشان دهنده کارایی پروژهها از نظر سنجه مالی، مشتری، رشد و یادگیری، رضایت مشتریان و ارتباط با جامعه است ولی از نظر سنجه فرایندهای داخلی با عدم کارایی مواجه بوده است.
Organizations activing in the banking industry are one of the most important sectors of the economic service providers around the world, which play a fundamental role in the sustainable development of countries. Lean Six Sigma (LSS) as a hybrid approach combining the strengths of Lean Thinking and Six Sigma helps to improve effectiveness and efficiency in financial institutions. The use of Balanced Scorecard and Lean Six Sigma achieves three objectives of strategic alignment, improved performance and customer satisfaction. The aim of this study was to provide an approach for measuring the efficiency of the Lean Six Sigma projects in the banking industry and, in this regard, a hybrid approach was presented using the Modified Balanced Scorecard (MBSC) model and the VIKOR technique. The results showed that this approach is a proper approach to measure the efficiency of improvement projects and the improvement project of Lean Six Sigma in one of the Banking institutions in terms of financial, customer, growth and learning, customer satisfaction measures and communication with the community enjoys a necessary efficiency in the Balanced Scorecard, but it does not have the required efficiency considering the measures of internal processes. Also, the results represented that the use of Balanced Scorecard technique could be very effective in the alignment of strategic plans and Lean Six Sigma improvement projects.
https://www.pqprc.ir/article_107874_2b9c8978975ffaa2dd0948912d807be7.pdf
صنعت بانکداری
شش سیگمای ناب
کارت امتیاز متوازن توسعه یافته
تکنیک های تصمیم گیری چند متغیره
تکنیک ویکور
banking industry
Lean Six Sigma (LSS)
Modified Balanced Scorecard (MBSC)
Multi Criteria Decision Making (MCDM) Techniques
VIKO.