@article { author = {Shamsi, Mohammadjavad and Shahrokhi, Mahmoud}, title = {Optimizing Redundancy and Inventory of Spare Equipment with Regard to Reliability in Multi-State Systems }, journal = {Journal of Quality Engineering and Management}, volume = {10}, number = {4}, pages = {339-353}, year = {2021}, publisher = {Parsian Quality and Productivity Research}, issn = {2322-1305}, eissn = {}, doi = {}, abstract = {This research provides a solution for modeling the availability of Feed Water System (FWS) of Heat Recovery Steam Generator (HRSG) in MAPNA Boiler and Equipment Engineering and Manufacturing Company with the aim of determining the system equipment suppliers in such a way that the total cost in the construction and operation of the system is minimized. The Feed Water System is one of the most sensitive parts of boilers; because its failure causes the boiler to stop and incurs irreparable costs to the system. The system may be in three capacities: full capacity, half load, and stop, each of which may impose costs on the system. For modeling, possible states are first written for the system and then the system configuration is plotted using the reliability block diagram and P&ID. Then the results of modeling with Markov chain method are placed in a mathematical optimization model. After solving the model, the optimal strategy in selecting equipment suppliers will be determined. }, keywords = {Availability,Reliability,Spare parts,redundancy,Markov Chain.   }, title_fa = {بهینه‌سازی افزونگی و موجودی تجهیزات یدکی با درنظر گرفتن قابلیت اطمینان در سیستم‌های چندحالته}, abstract_fa = {این پژوهش راهکاری جهت مدل‌سازی دسترسی‌پذیری سیستم تغذیه آب بویلرهای بازیاب حرارتی در شرکت مهندسی و ساخت بویلر و تجهیزات مپنا، با هدف تعیین تأمین‌کنندگان تجهیزات سیستم به ‌نحوی که هزینه کل در مراحل احداث و بهره‌برداری سیستم کمینه گردد، ارائه می‌کند. سیستم تغذیه آب یکی از حساس‌ترین بخش‌های بویلرها است؛ چراکه از کار افتادن آن باعث توقف بویلر شده و پیامدهای جبران‌ناپذیری را به سیستم وارد می‌کند. این سیستم ممکن است در سه وضعیت ظرفیت کامل، نیمه بار و توقف قرار گیرد که هر وضعیت نیز ممکن است، هزینه‌هایی را به سیستم تحمیل کند. برای مدل‌سازی، نخست وضعیت‌های محتمل برای سیستم نوشته و پس از آن به کمک بلوک دیاگرام قابلیت اطمینان و P&ID پیکربندی سیستم ترسیم می‌‌شود. سپس نتایج حاصل از مدل‌سازی با روش زنجیره مارکوف در یک مدل بهینه‌سازی ریاضی قرار داده می‌‌شود. پس از حل مدل استراتژی بهینه در انتخاب تأمین‌کنندگان تجهیزات مشخص خواهد شد.}, keywords_fa = {دسترسی‌پذیری,قابلیت اطمینان,قطعات یدکی,افزونگی,زنجیره مارکوف}, url = {https://www.pqprc.ir/article_132992.html}, eprint = {https://www.pqprc.ir/article_132992_cbb7cfb13dc2b6c0708ab5065cee2d2e.pdf} }