Presenting a multivariate model of the effect of maintenance and repairs on production quality in pharmaceutical industry processes using the Bayesian approach

Mashayekh, Farshid; Azizi, Amir; Mehdizadeh, Esmaiel; Yazdani, Mehdi

doi:10.48313/jqem.2024.210887

Presenting a multivariate model of the effect of maintenance and repairs on production quality in pharmaceutical industry processes using the Bayesian approach

Document Type : Original Article

Authors

Farshid mashayekh ¹

Amir Azizi ¹

Esmaiel Mehdizadeh ²

Mehdi Yazdani ²

¹ Department of Industrial Engineering, Tehran Science and Research Branch, Department of Industrial Engineering, Islamic Azad University, Tehran, Iran.

² Department of Industrial Engineering, Islamic Azad University, Qazvin, Iran.

https://doi.org/10.48313/jqem.2024.210887

Abstract

This paper aims to develop a comprehensive model for the synergy of quality, sustainability, and agility in drug production systems. This model seeks to use data collected by automated inspection systems to improve product quality, plan preventive maintenance, and optimize production planning. Reviewing the literature on quality management, sustainability, and agility in production, an integrated model of quality, maintenance, and production (IQMP) was designed and developed using Bayesian approaches. The results show that the model can effectively improve product quality, and increase production stability and system agility against environmental changes and fluctuations. Using online inspection data in this model significantly increases its accuracy and efficiency in decisions related to quality, maintenance, and production planning. In addition to helping to improve the efficiency of production systems, this model can be used as a strategic tool for production and maintenance managers. By implementing this model in real conditions, companies can take advantage of the data collected by automatic inspection systems and make more detailed plans for maintenance and quality control.

Keywords

Bayesian approach

quality control

production planning

preventive maintenance

[1] Sahara, C. R., & Aamer, A. M. (2022). Real-time data integration of an internet-of-things-based smart warehouse: a case study. International Journal of Pervasive Computing and Communications, 18(5), 622-644.

[2] Tao, F., Qi, Q., Liu, A., & Kusiak, A. (2018). Data-driven smart manufacturing. Journal of Manufacturing Systems, 48, 157-169, 2018.

[3] Prajapati, A., Bechtel, J., & Ganesan, S. (2012). Condition based maintenance: a survey. Journal of Quality in Maintenance Engineering, 18(4), 384-400.

[4] Ahmad R., & Kamaruddin, S. (2012). An overview of time-based and condition-based maintenance in industrial application. Computers &

industrial engineering, 63(1), 135-149.

[5] Zeppetella, L., Gebennini, E., Grassi, A., & Rimini, B. (2017). Optimal production scheduling with customer-driven demand substitution. International Journal of Production Research, 55(6), 1692-1706.

[6] Montgomery, D. C. (2020). Introduction to statistical quality control. John Wiley & Sons.

[7] Makis, V. (2009). Multivariate Bayesian process control for a finite production run. European Journal of Operational Research, 194(3), 795-806.

[8] Victorino, L., Verma, R., & Wardell, D. G. (2013). Script usage in standardized and customized service encounters: Implications for perceived service quality. Production and Operations Management, 22(3), 518-534.

[9] EFNMS, (2014). European Federation of National Maintenance Societies.

[10] Hinds, M. D. (1985). PREVENTIVE MAINTENANCE: A CHECKLIST. in The New York Times, ed.

[11] Shewhart W. A. & Deming, W. E. (1986). Statistical method from the viewpoint of quality control. Courier Corporation.

[12] Joe Qin, S. (2003). Statistical process monitoring: basics and beyond. Journal of Chemometrics: A Journal of the Chemometrics Society, 17(8-9), 480-502.

[13] Lai, X., Chen, Z., & Bidanda, B. (2019). Optimal decision of an economic production quantity model for imperfect manufacturing under hybrid maintenance policy with shortages and partial backlogging. International Journal of Production Research, 57(19), pp. 6061-6085.

[14] Arani, M., Dastmard, M., Ebrahimi, Z. D., Momenitabar, M., & Liu, X. (2020). Optimizing the total production and maintenance cost of an integrated multi-product process and maintenance planning (IPPMP) model. IEEE International Symposium on Systems Engineering (ISSE), 1-8.

[15] Salmasnia, A., & Kaveie, M. (2022). Joint optimisation of production run length and maintenance policy for an imperfect process with multiple correlated quality characteristics. International Journal of Quality Engineering and Technology, 8(4), 379-405.

[16] Boumallessa, Z., Chouikhi, H., Elleuch, M., & Bentaher, H.(2023). Modeling and optimizing the maintenance schedule using dynamic quality and machine condition monitors in an unreliable single production system," Reliability Engineering & System Safety, 235, 109216.

[17] Megoze Pongha, P., Kenné, J.-P., De Jesus Garcia, E., & Hof, L. A. (2023). Optimal joint production, maintenance and product quality control policies for a continuously deteriorating manufacturing system. International Journal of Modelling and Simulation, 43(3), 135-152.

[18] Fakher, H. B., Nourelfath, M., & Gendreau, M. (2018). Integrating production, maintenance and quality: A multi-period multi-product profit-maximization model. Reliability Engineering & System Safety, 170, 191-201.

[19] Mitchell, M. (1998). An introduction to genetic algorithms. MIT press.

[20] Ramezani, S., Moini, A., & Riahi, M. (2019). A Model to Determining the State of Degradation and Remaining Useful Life of Rotating Equipment, With a New Approach to Combination and Predicting Health Index," (in eng), Modares Mechanical Engineering, 19(10), 2351-2365.

[21] Verma, S., Pant, M., & Snasel, V. (2021). A comprehensive review on NSGA-II for multi-objective combinatorial optimization problems. IEEE access, 9, 57757-57791.

[22] Crosier, R. B. (1988). Multivariate generalizations of cumulative sum quality-control schemes. Technometrics, 30(3), 291-303.

[23] Lowry, C. A., Woodall, W. H., Champ, C. W., & Rigdon, S. E. (1992). A multivariate exponentially weighted moving average control chart. Technometrics, 34(1), 46-53.

[24] Mitchell, M. (1998). An introduction to genetic algorithms. MIT press.

[25] Ramezani, S., Moini, A., & Riahi, M. (2019). A Model to Determining the State of Degradation and Remaining Useful Life of Rotating Equipment, With a New Approach to Combination and Predicting Health Index. Modares Mechanical Engineering, 19(10), pp. 2351-2365.