Journal of Quality Engineering and Management

Keyword Index

A

ABAQUS Structural design of submarine pressure hull based on uncertainty and reliability methods [Volume 14, Issue 1, 2024, Pages 79-90]
Absorbing Markov Chain The optimization of process target means in different markets [Volume 14, Issue 1, 2024, Pages 68-78]
Accelerated Degradation Testing Design of an integrated model combining ALT and ADT for lifetime estimation in the reliability analysis of a Turbine Engine Nozzle [Volume 15, Issue 1, 2025, Pages 50-66]
Accelerated life test Estimation of the remaining useful life of equipment with gradual deterioration with condition-based maintenance policy with the presence of two failure accelerators [Volume 6, Issue 4, 2016, Pages 260-273]
Accelerated Life Testing Design of an integrated model combining ALT and ADT for lifetime estimation in the reliability analysis of a Turbine Engine Nozzle [Volume 15, Issue 1, 2025, Pages 50-66]
Accelerator life test A new method for modeling the reliability of mechanical systems with vanilla-shaped failure rates based on censored and accelerator tests [Volume 6, Issue 3, 2016, Pages 204-212]
Acceptance and rejection risk Assess and Address the Risks of Decision Making in the Conformity Assessment Arocess [Volume 9, Issue 4, 2019, Pages 320-333]
Accessibility. Improving the Quality of Design in Multicomponent Systems via Layout Optimization Towards Better Performance and Serviceability [Volume 10, Issue 4, 2020, Pages 299-312]
Action Research Approach Proposing an Integrated Approach for Total Quality Management Using Soft System Methodology – The Case of a Food Industrial Company [Volume 8, Issue 2, 2018, Pages 116-132]
Activity-Based Costing (ABC) Development of a mathematical model for activity-based costing based on risk-based resource allocation [Volume 12, Issue 4, 2022, Pages 481-494]
Adaptive control chart of variable sampling distance Design of an adaptive control chart with variable sampling intervals using the maximum exponentially weighted moving average (EWMA) of squared deviations [Volume 5, Issue 1, 2015, Pages 1-12]
Adaptive control charts Optimal Economic Statistical Design of Fully Adaptive Descriptive Control Charts for Monitoring Nonconformities [Volume 8, Issue 1, 2018, Pages 21-36]
Adaptive neural-fuzzy inference system A neural-fuzzy adaptive inference system for statistical control of the process with self-correlated data [Volume 6, Issue 4, 2016, Pages 250-259]
Adjusted Average Time to Signal Comparison of Adaptive Control Charts for Non-Normal Data Using Simulation [Volume 1, Issue 1, 2011, Pages 45-55]
Advanced planning and scheduling Providing an exact mathematical model for process planning and advanced scheduling with the aim of reducing quality costs [Volume 2, Issue 3, 2012, Pages 105-115]
Advanced product quality planning Advanced product quality planning model in a defense organization [Volume 7, Issue 4, 2017, Pages 306-324]
After Sales Services Design of After-Sales Service Model with Combined ISM-Delphi Fuzzy (Case Study: LPG Industry of Iran) [Volume 9, Issue 1, 2019, Pages 50-71]
After-Sales Services Analysis of Effective Interactions on After-Sales Services in Iran's Liquefied Gas Industry Using DEMATEL Fuzzy [Volume 8, Issue 2, 2018, Pages 133-151]
Agent-Based Simulation Quality improvement of conflict analysis in the worldwide gas industry using graph model scenarios and agent-based methodology [Volume 14, Issue 4, 2024, Pages 321-357]
Aggregate coefficient Proposing a conceptual model for influential factors in determining the aggregation coefficient in production planning using fuzzy interpretive structural modeling [Volume 15, Issue 1, 2025, Pages 67-82]
Aggregate Production Planning Proposing a conceptual model for influential factors in determining the aggregation coefficient in production planning using fuzzy interpretive structural modeling [Volume 15, Issue 1, 2025, Pages 67-82]
Agricultural waste Designing a supply chain network for agricultural waste from the country's palm groves [Volume 14, Issue 1, 2024, Pages 31-45]
Airlines Analysis of key factors of customer satisfaction with airline service quality and airline ratings: A combined VIKOR-DEMATEL approach [Volume 15, Issue 3, 2025, Pages 316-338]
Allocation of accessibility-surplus components Provide an efficient model to increase the accessibility of systems with repairable and non-repairable parts as a multi-objective problem of allocating surplus components [Volume 6, Issue 3, 2016, Pages 191-203]
Analytical hierarchy process. Prioritizing the Critical Success Factors of Supply Chain Quality Management Based on Weighting Indicators Using Analytical Hierarchy Process: A Case Study in Golbaft Bag Manufacturing Company) [Volume 9, Issue 1, 2019, Pages 11-26]
Analytic Hierarchy Process Forecasting the Customer Lifetime Value by the Developed RFM Model: A Case Study in Insurance [Volume 8, Issue 4, 2018, Pages 327-336]
Anderson-Peterson method Introducing the new development approach of DEA and TOPSIS for performance rating (Case study of cement companies listed on the stock exchange) [Volume 7, Issue 1, 2017, Pages 69-81]
ANFIS Designing a Service Supply Chain Performance Evaluation Model Using Neural-Fuzzy Networks to Increase Service Quality and Productivity (Case Study: Home Appliance Companies in Iran) [Volume 8, Issue 3, 2018, Pages 182-202]
Approximate maximum likelihood estimate A novel approach to nonparametric estimation of the intensity function of spatial Poisson point processes and its application in estimating the Intensity of Inga Sapindoides trees [Volume 13, Issue 3, 2023, Pages 317-334]
ARCH time series model Investigating the effect of estimating ARCH model parameters on financial process control charts [Volume 7, Issue 2, 2017, Pages 106-113]
Arrhenius model Design of an integrated model combining ALT and ADT for lifetime estimation in the reliability analysis of a Turbine Engine Nozzle [Volume 15, Issue 1, 2025, Pages 50-66]
Artificial Neural Network Optimization of Redundancy Allocation Problem with Non-exponential Repairable Components Using Simulation Method and Artificial Neural Networks [Volume 9, Issue 3, 2019, Pages 226-243]
Artificial Neural Network Step Change Point Estimation in the Mean of Multiple Linear Profiles by Probabilistic Neural Network [Volume 10, Issue 1, 2020, Pages 34-48]
Artificial Neural Network The impact of e-business processes on business value creation in the digital supply chain by examining the role of information sharing: An artificial neural network modeling approach [Volume 15, Issue 4, 2025, Pages 369-397]
Artificial Neural Network Hybrid PLSANN modeling to investigate the mediating role of Industry 4.0 technologies and customer satisfaction in the relationship between quality management practices and organizational performance [Volume 15, Issue 4, 2025, Pages 339-368]
Artificial Neural Network Analysis of the demand forecasting process through the supply chain and comparison of the current and desired states in the book publishing [Volume 15, Issue 3, 2025, Pages 304-315]
Artificial neural network (ANN) Detection of Out-of-Control Parameters in Polynomial Profiles Using an Artificial Neural Network [Volume 2, Issue 1, 2012, Pages 21-26]
Assembly error The effect of random percentage of defective items on product reliability [Volume 7, Issue 4, 2017, Pages 246-270]
Asymmetric GARCH Improving the quality of statistical modeling of wind speed volatilities using GARCH and asymmetric GARCH models (Ardebil Meteorological Station) [Volume 12, Issue 3, 2022, Pages 343-356]
Asymmetric tolerances Developing a new functional capability index C_p^''' (Profile) for a simple linear profile with asymmetric tolerance [Volume 12, Issue 3, 2022, Pages 357-384]
Attribute-based networks Developing Control Charts for Statistical Monitoring of a Dynamic Network of Emergency Service [Volume 11, Issue 4, 2021, Pages 377-392]
Augmented epsilon constraint A multi-Objective Optimization Mathematical Model for Design and Planning of Sustainable Resilience Supply Chain under the Risk of Supply Disruption [Volume 9, Issue 3, 2019, Pages 212-225]
Autocorrelated data A neuro-fuzzy adaptive inference system for statistical control of autocorrelated data processes [Volume 4, Issue 1, 2014, Pages 33-42]
Auto-correlated multivariate simple linear profiles Monitoring Auto-Correlated Multivariate Simple Linear Profiles in Phase I under AR(1) and MA(1) Models [Volume 8, Issue 1, 2018, Pages 1-7]
Autocorrelation Monitoring Defective Rate of Autocorrelated Binary Data Under 100% Inspection Conditions [Volume 2, Issue 1, 2012, Pages 56-63]
Auto insurance Target replacement , a new approach to increase the performance of fraud detection system in auto insurance utilizing supervising learning [Volume 11, Issue 4, 2021, Pages 413-428]
Autoregressive Moving Average Improving the quality of statistical modeling of wind speed volatilities using GARCH and asymmetric GARCH models (Ardebil Meteorological Station) [Volume 12, Issue 3, 2022, Pages 343-356]
Auxiliary variable-based size model of networks Self-assessment of product quality dimensions based on the network auxiliary variable-based size model [Volume 4, Issue 1, 2014, Pages 51-63]
Availability Optimizing Redundancy and Inventory of Spare Equipment with Regard to Reliability in Multi-State Systems [Volume 10, Issue 4, 2020, Pages 339-353]
Availability Estimating the availability of CNC milling machine using Markov chain [Volume 11, Issue 2, 2021, Pages 107-126]
Availability Bi-objective optimization of active redundancy allocation in the electrical power distribution system of a marine vessel considering load sharing and a single repairman [Volume 16, Issue 1, 2026, Pages 15-38]
Average degeree of customer satisfaction Optimization for enhancing the quality of the queueing model family {M/E_r/1,r∈N} based on the cost function, probability of system stationary, and customer satisfaction under a finite time horizon [Volume 15, Issue 3, 2025, Pages 271-280]
Average Number of Observations to Signal Comparison of Adaptive Control Charts for Non-Normal Data Using Simulation [Volume 1, Issue 1, 2011, Pages 45-55]
Average Number of Observations to Signal Monitoring Defective Rate of Autocorrelated Binary Data Under 100% Inspection Conditions [Volume 2, Issue 1, 2012, Pages 56-63]
Average Run Length Developing an Approach for Monitoring Simple Linear Profiles Parameters in Short Run Processes in Phase ΙΙ [Volume 10, Issue 1, 2020, Pages 16-33]
Average Run Length Performance Evaluation of Simple Linear Profile Monitoring Methods in Two-Stage Processes [Volume 1, Issue 1, 2011, Pages 1-13]
Average run length (ARL) Nonparametric control charts based on runs and Wilcoxon-type rank-sum statistics [Volume 12, Issue 3, 2022, Pages 273-298]
Average run length (ARL) Examination of the Effect of Measurement Error on the Response Variable of Linear Profiles Using the Classical Model [Volume 2, Issue 2, 2012, Pages 65-70]
Average Sample Number to Signal (ASN) Optimal Design of a Sign Control Chart with Variable Sample Size [Volume 2, Issue 2, 2012, Pages 97-104]
Average trail length Development of a piecemeal regression-based approach for monitoring multiple linear profiles with phase interactions [Volume 6, Issue 4, 2016, Pages 237-249]
Average trail length Development of multivariate variance-covariance matrix monitoring methods in phase [Volume 4, Issue 1, 2014, Pages 14-22]
Axiomatic design method Developing a Product Design Model for a Specific Electro-Optical Product Adopting Design to Cost (DTC) Procedure [Volume 10, Issue 3, 2020, Pages 171-188]
Ayoshan earthen dam Impact of Value Engineering with the Event on Resistance Economics in the Implementation of Ayoshan Earthen Dam Project [Volume 8, Issue 3, 2018, Pages 234-241]

B

Balanced Scorecard Evaluate the performance of an advanced maintenance management system with a physical asset management approach [Volume 7, Issue 2, 2017, Pages 94-105]
Banks' mission Designing a causal model to improve the quality of supervision of banks and credit institutions based on the type of mission [Volume 15, Issue 2, 2025, Pages 110-136]
Barriers An analysis of the barriers to the implementation of quality 4.0 utilizing the approach fuzzy DANP [Volume 14, Issue 4, 2024, Pages 304-320]
Basic Warranty Integrated Price Optimization, Basic Warranty Policies and Warranty Renewal Taking into Account Products out of Warranty [Volume 8, Issue 1, 2018, Pages 63-74]
Basic Warranty Introduce a New Simulation-Based Optimization Model to Integrate Decisions about Products under Warranty and Out of Warranty [Volume 8, Issue 4, 2018, Pages 310-326]
Bayesian approach Economic-Statistical Design of Control Charts for monitoring the Process Mean with Known Standard Deviation Based on Bayesian Predictive Distribution [Volume 9, Issue 4, 2019, Pages 284-294]
Bayesian Approach Presenting a multivariate model of the effect of maintenance and repairs on production quality in pharmaceutical industry processes using the Bayesian approach [Volume 13, Issue 4, 2023, Pages 335-354]
Bayesian Belief Network(BBN) Identification and Analysis of Product Quality Risks in pharmaceutical industry (Case study: Daana Pharmaceutical Co.) [Volume 11, Issue 3, 2021, Pages 261-284]
Bayesian control chart Economic-statistical design of Bayesian control chart based on the predictive distribution for individual observations with an exponential qualitative characteristic distribution [Volume 12, Issue 2, 2022, Pages 153-169]
Bayesian Estimation Bayesian Inference Parameter Reliability in Two-Parameter Riley Distribution under Increasingly Censored Bond Samples [Volume 10, Issue 2, 2020, Pages 159-168]
Bayesian Estimation Estimating the parameters of two-parameter exponential distribution under random censoring with the presence of outlier data and determining the warranty period related to product quality. [Volume 12, Issue 1, 2022, Pages 15-38]
Bayesian Estimation Bayesian inference of the parameters under the generalized power Lindley distribution based on the hybrid type-II censoring scheme: a simulation study and application [Volume 14, Issue 2, 2024, Pages 177-198]
Bayesian Estimation Bayesian estimation of fractional Ornstein-Uhlenbeck model parameters using the sir algorithm in financial derivatives pricing [Volume 14, Issue 3, 2024, Pages 217-223]
Bayesian Estimation Bayesian calculation of the quality of the Kullback-Leibler divergence in normal distributions [Volume 15, Issue 1, 2025, Pages 20-30]
Bayesian estimator Estimation of reliability parameter for inverted exponential generalized distribution based on type 2 incremental censorship samples [Volume 10, Issue 1, 2020, Pages 60-74]
Bayesian Network Estimating the reliability of the rotor assembly mechanism in the F232G mechanical spindle using fuzzy Bayesian networks [Volume 4, Issue 1, 2014, Pages 43-50]
Bayesian prediction Bayesian Prediction for Censored Data from the Kumaraswamy Distribution based on Constant-Stress Accelerated Life Test Model and Its Application in Ceramic Materials [Volume 11, Issue 1, 2021, Pages 15-32]
Beta distribution The effect of random percentage of defective items on product reliability [Volume 7, Issue 4, 2017, Pages 246-270]
Beta Factor Model Presenting a method based on PDS model and AHP technique for calculating and analyzing reliability considering the common cause failure for non-uniform components (Case study of the output of the dynamic position stabilization system of a vessel) [Volume 6, Issue 2, 2016, Pages 103-117]
Big Data Rethinking strategic decision quality through big data: A decision architecture based on data quality, information quality, and information adoption [Volume 15, Issue 3, 2025, Pages 281-303]
Biomass power plant Provide an integrated mathematical planning model for selecting and allocating orders for biomass power plant green suppliers [Volume 7, Issue 1, 2017, Pages 1-15]
Bivariate Binomial Attribute Control Chart Change-Point Estimation in the Mean of a Two-Attribute Attribute Process with a Binomial Distribution [Volume 2, Issue 1, 2012, Pages 15-20]
Blockchain Reliability enhancing in hospital pharmaceutical supply chains using a blockchain-based system dynamics approach [Volume 15, Issue 4, 2025, Pages 468-488]
Block Diagram Extended Block Diagram Method for Evaluating the Reliability of Multi-State System with Dependent Components [Volume 8, Issue 2, 2018, Pages 75-85]
Block Diagram Optimizing the program of preventive maintenance of the series-parallel system: A case study of the water supply system of power plants [Volume 11, Issue 1, 2021, Pages 45-60]
Block diagram model Design for Reliability: Case Study HRSG Boiler [Volume 10, Issue 3, 2020, Pages 189-202]
Buffer size Developing a Mathematical Model to Determine the Optimum Buffer Size and Redundancy Allocation in Series-Parallel Production Systems [Volume 9, Issue 2, 2019, Pages 101-123]
Burr Distribution Economic statistical design of X ̅ control chart for abnormal quality characteristic with Markov chains approach [Volume 6, Issue 2, 2016, Pages 79-91]
Burr type XII distribution Determining optimal scheme in type I Hybrid censoring from Burr type XII distribution based on cost function [Volume 11, Issue 2, 2021, Pages 191-202]
Burr XII distribution Economic design of X-bar control chart in flow process under Burr XII shock model with non-uniform sampling schemes [Volume 11, Issue 2, 2021, Pages 127-154]
Burr-XII shock model Realistic economic-statistical design of control chart based on the Lorenzen and Vance model in the presence of independent multiple assignable causes under the burr-XII shock model [Volume 14, Issue 2, 2024, Pages 127-144]
Business excellence models Identifying and categorizing the components of management commitment in implementing business excellence models [Volume 4, Issue 1, 2014, Pages 64-76]
Business Model Modeling the automotive industry with the approach of increasing and improving productivity in Iran's non-oil exports using a dynamic system [Volume 14, Issue 1, 2024, Pages 18-30]
Business Processes The role of design of experiment in the ecosystem of the fourth industrial revolution [Volume 13, Issue 4, 2023, Pages 373-394]
Business Process Management (BPM) Diagnosis and Improvement Strategies for the Issuance Processes of Credit Guarantee Insurance Policies in Tose’e Ta’avon Using a Combination of TOPSIS, Shannon Entropy, and the Nominal Group Technique [(Articles in Press)]
Business Value The impact of e-business processes on business value creation in the digital supply chain by examining the role of information sharing: An artificial neural network modeling approach [Volume 15, Issue 4, 2025, Pages 369-397]

C

Capacity Supply Chain Capabilities Interpretive Prioritization of Sustainable Outsourcing Risk Control Based on Capacity Supply Chain Capabilities Based on Analysis Interpretive Ranking Process (IRP) [Volume 10, Issue 3, 2020, Pages 203-226]
Carbon Emission Designing an integrated green supply chain model with an emphasis on improving environmental quality and increasing customer satisfaction [Volume 15, Issue 1, 2025, Pages 31-49]
Cascade Effect Monitoring Two-Stage Processes with Gamma-Distributed Outputs Using Generalized Linear Models and the Inverse NORTA Method [Volume 2, Issue 1, 2012, Pages 50-55]
Cascading Failure Presenting a method based on PDS model and AHP technique for calculating and analyzing reliability considering the common cause failure for non-uniform components (Case study of the output of the dynamic position stabilization system of a vessel) [Volume 6, Issue 2, 2016, Pages 103-117]
Censored Data Study of Micro-Droplet Splashing in Coating Processes Using the Reliability Model Based on Censored Data [Volume 10, Issue 2, 2020, Pages 86-101]
Censored Data Estimation of Weibull distribution parameters using a genetic algorithm [Volume 15, Issue 4, 2025, Pages 415-432]
Censored lifetime test A new method for modeling the reliability of mechanical systems with vanilla-shaped failure rates based on censored and accelerator tests [Volume 6, Issue 3, 2016, Pages 204-212]
Change point Estimation of the point of change in the multivariate normal process covariance matrix using neural networks [Volume 6, Issue 1, 2016, Pages 21-34]
Change point Development of a Time-Based Segmentation Method for Phase I Profile Monitoring [Volume 1, Issue 1, 2011, Pages 28-38]
Change point Detection of Change Points in Poisson Regression Profiles with a Linear Trend [Volume 1, Issue 1, 2011, Pages 39-44]
Change Point Estimation Step Change Point Estimation in the Mean of Multiple Linear Profiles by Probabilistic Neural Network [Volume 10, Issue 1, 2020, Pages 34-48]
ChatGPT said: Profile Monitoring Performance Evaluation of Simple Linear Profile Monitoring Methods in Two-Stage Processes [Volume 1, Issue 1, 2011, Pages 1-13]
Classical Measurement Error Model Examination of the Effect of Measurement Error on the Response Variable of Linear Profiles Using the Classical Model [Volume 2, Issue 2, 2012, Pages 65-70]
Closed loop green supply chain Multi-Objective Green Agile Closed Loop Supply Chain Network Design Using Multi-objective Weed Optimization Algorithm [Volume 9, Issue 4, 2019, Pages 305-319]
Closed-loop supply chain Closed loop supply chain network design under disturbance and uncertainty conditions considering quality and resilience strategy [Volume 6, Issue 2, 2016, Pages 133-145]
Closed-loop supply chain Developing a multi-objective mathematical model of green closed-loop supply chain In terms of selling returned products using the Epsilon-constraint method approach [Volume 11, Issue 4, 2021, Pages 351-376]
Closed-loop supply chain Optimization of a Closed-Loop Viable Supply Chain Network under Hybrid Uncertainty [(Articles in Press)]
Cold Material Integration of Six Sigma Methodology and Discrete-Event System Simulation for Quality Improvement and Reduction of Cold Material in the Smelting Plant of Sarcheshmeh Copper Complex [Volume 2, Issue 3, 2012, Pages 142-152]
Combined optimization Integrated Price Optimization, Basic Warranty Policies and Warranty Renewal Taking into Account Products out of Warranty [Volume 8, Issue 1, 2018, Pages 63-74]
Common Cause Failure The Effect of Common Cause Failure in Predicting the Reliability of the Railway Industry [Volume 12, Issue 2, 2022, Pages 125-151]
Common Cause Failures Presenting a method based on PDS model and AHP technique for calculating and analyzing reliability considering the common cause failure for non-uniform components (Case study of the output of the dynamic position stabilization system of a vessel) [Volume 6, Issue 2, 2016, Pages 103-117]
Competing risks Inference on Accelerated Life Testing for One-Shot Device with Competing Risks [Volume 11, Issue 3, 2021, Pages 285-306]
Complex product Developing a method for allocating reliability to subsystems of a cube satellite adopting suppliers readiness level approach. [Volume 10, Issue 2, 2020, Pages 103-119]
Components dependency Extended Block Diagram Method for Evaluating the Reliability of Multi-State System with Dependent Components [Volume 8, Issue 2, 2018, Pages 75-85]
Comprehensive quality control Designing a conceptual model for evaluating the excellence of work units in organizations [Volume 7, Issue 2, 2017, Pages 114-128]
Computational Fluid Dynamics (CFD) Analysis of the effects of the main parameters of the geometric shape of the helicopter fuselage on the aerodynamic coefficients using Taguchi design and response procedure methodology [Volume 6, Issue 2, 2016, Pages 66-78]
Concrete" Analyzing the age of concrete with the method of gage study and profile monitoring, case study: an executive project [Volume 12, Issue 4, 2022, Pages 461-480]
Condition-based Maintenance Investigating the combined effect of redundancy allocation and stochastic dependency in condition-based maintenance model in series-parallel systems considering load sharing [Volume 14, Issue 1, 2024, Pages 46-67]
Condition-based maintenance and repairs Estimation of the remaining useful life of equipment with gradual deterioration with condition-based maintenance policy with the presence of two failure accelerators [Volume 6, Issue 4, 2016, Pages 260-273]
Condition Monitoring Implementation Condition Monitoring in Wind Turbines for Reducing Maintenance Cost with Using Scada Method [Volume 9, Issue 3, 2019, Pages 261-270]
Condition monitoring of diesel engines Proposing a framework for reliability estimation using a proportional hazards model based on diesel engine condition monitoring data [Volume 14, Issue 1, 2024, Pages 1-17]
Conflict equilibrium model Quality improvement of conflict analysis in the worldwide gas industry using graph model scenarios and agent-based methodology [Volume 14, Issue 4, 2024, Pages 321-357]
Conformity assessment Assess and Address the Risks of Decision Making in the Conformity Assessment Arocess [Volume 9, Issue 4, 2019, Pages 320-333]
Contract selection Mathematical model of contract selection and determining the amount of liquefied natural gas purchase taking into account the general and developmental discount [Volume 7, Issue 4, 2017, Pages 342-357]
Control chart A neural-fuzzy adaptive inference system for statistical control of the process with self-correlated data [Volume 6, Issue 4, 2016, Pages 250-259]
Control chart Statistical-economic design of X ̅ control chart under the newly generalized two-parameter Weibull shock model [Volume 7, Issue 2, 2017, Pages 129-139]
Control chart Integrating the Taguchi Loss Approach into the Economic Statistical Design of the X ̅ Control Chart Using an Asymmetric Loss Function [Volume 7, Issue 4, 2017, Pages 287-305]
Control chart Economic statistical design of control chart for individual observations of exponential distribution [Volume 10, Issue 2, 2020, Pages 135-144]
Control chart Economic-Statistical Design of Control Charts for monitoring the Process Mean with Known Standard Deviation Based on Bayesian Predictive Distribution [Volume 9, Issue 4, 2019, Pages 284-294]
Control chart Economic design of X-bar control chart in flow process under Burr XII shock model with non-uniform sampling schemes [Volume 11, Issue 2, 2021, Pages 127-154]
Control chart Design of control chart for reliability monitoring of systems subjected to cumulative shocks [Volume 11, Issue 4, 2021, Pages 323-338]
Control chart Monitoring Defective Rate of Autocorrelated Binary Data Under 100% Inspection Conditions [Volume 2, Issue 1, 2012, Pages 56-63]
Control Charts Investigating the effect of estimating ARCH model parameters on financial process control charts [Volume 7, Issue 2, 2017, Pages 106-113]
Control Charts Optimization of Control Charts with Multi-Stage Sampling Using Genetic Algorithm [Volume 8, Issue 3, 2018, Pages 214-223]
Control Charts Sturdy Control Charts for Time Series Data [Volume 10, Issue 4, 2020, Pages 269-278]
Control Charts Nonparametric control charts based on runs and Wilcoxon-type rank-sum statistics [Volume 12, Issue 3, 2022, Pages 273-298]
Control Charts A Review of the Application of Statistical Process Control Methods in the Design and Production Processes of Software Products [Volume 2, Issue 1, 2012, Pages 37-49]
Control Charts A neuro-fuzzy adaptive inference system for statistical control of autocorrelated data processes [Volume 4, Issue 1, 2014, Pages 33-42]
Control chart X ̄ Realistic economic-statistical design of control chart based on the Lorenzen and Vance model in the presence of independent multiple assignable causes under the burr-XII shock model [Volume 14, Issue 2, 2024, Pages 127-144]
Control chart X ̅ Stattistical Design of X ̅ Control Chart With Variable Sample Size Under Weibull Shock Model With Non-Uniform Sampling Intervals [Volume 11, Issue 3, 2021, Pages 221-241]
Cooperative Investment Guarantee Fund Diagnosis and Improvement Strategies for the Issuance Processes of Credit Guarantee Insurance Policies in Tose’e Ta’avon Using a Combination of TOPSIS, Shannon Entropy, and the Nominal Group Technique [(Articles in Press)]
Correlated data Statistical-economic design of X ̅ control diagram for correlated data under generalized shock and Weibull models [Volume 7, Issue 3, 2017, Pages 200-207]
Correlation Investment Alliance Defense Systems with Reliability Improvement Approach [Volume 6, Issue 3, 2016, Pages 146-157]
Correlation Correlated Multi-Objective Optimization: Application to the Separation of Perindopril [Volume 2, Issue 1, 2012, Pages 9-14]
Cost Impact of Value Engineering with the Event on Resistance Economics in the Implementation of Ayoshan Earthen Dam Project [Volume 8, Issue 3, 2018, Pages 234-241]
Cost Design of a series-parallel system based on the problem of optimization of reliability and cost [Volume 12, Issue 1, 2022, Pages 39-50]
Costa and Rahim economic model Economic statistical design of control chart for individual observations of exponential distribution [Volume 10, Issue 2, 2020, Pages 135-144]
Cost Function Determining optimal scheme in type I Hybrid censoring from Burr type XII distribution based on cost function [Volume 11, Issue 2, 2021, Pages 191-202]
Cost Function Improving the Quality of M/M/m/K Queueing Systems Using System Cost Function Optimization [Volume 13, Issue 3, 2023, Pages 267-280]
Cost Function Optimization for enhancing the quality of the queueing model family {M/E_r/1,r∈N} based on the cost function, probability of system stationary, and customer satisfaction under a finite time horizon [Volume 15, Issue 3, 2025, Pages 271-280]
Cost limitation Designing a Model for Estimating the Cost of Pro-Rata Warranty with limitation of Each Failure Rectification Cost under Inflationary Conditions [Volume 9, Issue 1, 2019, Pages 72-79]
Cost of damage to the brand Provide a method to calculate the hidden costs and quality opportunities with the approach of harm to the goodwill of customers and the brand of the organization [Volume 11, Issue 1, 2021, Pages 1-14]
Cost Rate Determining the optimal time policy model for the products with multiple failure states by considering a mixture distribution [Volume 15, Issue 2, 2025, Pages 137-147]
Covariance matrix Estimation of the point of change in the multivariate normal process covariance matrix using neural networks [Volume 6, Issue 1, 2016, Pages 21-34]
COVID-19 vaccine cold supply chain Modeling COVID-19 Vaccine Cold Supply Chain Under Operational and Disruption Risks: A Multi-Criteria Simulation-Optimization Approach [(Articles in Press)]
CREAM method Evaluation and improvement of human reliability capabilities in using short and medium range radar system by CREAM fuzzy method [Volume 11, Issue 4, 2021, Pages 339-350]
Credit limit New combination of robust planning with credit constraints for responsive-dependent closed-loop supply chain network under uncertainty and disruptions [Volume 6, Issue 4, 2016, Pages 213-227]
Critical quality components Determining the contribution of uncorrelated components of product quality variability using a nonlinear functional function for the components [Volume 4, Issue 1, 2014, Pages 1-13]
Cumulative control charts Replacing the sequence probability ratio test with the V mask in the cumulative summative control chart [Volume 6, Issue 1, 2016, Pages 35-44]
Cumulative shock Design of control chart for reliability monitoring of systems subjected to cumulative shocks [Volume 11, Issue 4, 2021, Pages 323-338]
Cumulative sum control chart Development of cumulative sum control controls and dual rhythm moving moving averages based on generalized linear regression to monitor cascading processes [Volume 7, Issue 2, 2017, Pages 82-93]
Cumulative sum control chart Monitoring Zero-inflated Poisson Processes based on Model-based Cumulative Sum(CUSUM) [Volume 12, Issue 4, 2022, Pages 439-460]
Customer Lifetime Value Forecasting the Customer Lifetime Value by the Developed RFM Model: A Case Study in Insurance [Volume 8, Issue 4, 2018, Pages 327-336]
Customer Orientation Identification and Ranking of Quality Dimensions in Service Organizations: A Case Study of Pasargad Bank [Volume 2, Issue 3, 2012, Pages 153-161]
Customer Satisfaction Hybrid PLSANN modeling to investigate the mediating role of Industry 4.0 technologies and customer satisfaction in the relationship between quality management practices and organizational performance [Volume 15, Issue 4, 2025, Pages 339-368]
CUSUM control chart Presenting new control approaches for monitoring quality characteristics with Weibull distribution under type 2 censorship in a two-step process [Volume 6, Issue 1, 2016, Pages 9-20]
CUSUM Type Sign Chart Investigation of the effect of inertia on the performance of nonparametric signals of cumulative sum and rhythmic moving average [Volume 6, Issue 1, 2016, Pages 45-56]

D

Data-based theory Identifying and Analyzing Scenarios of Maintenance System Assessment Using Grounded Theory and Fuzzy Cognitive Maps [Volume 9, Issue 1, 2019, Pages 27-49]
Data Center Service Contract-Aware Quality Supervisory Methodology in Cloud Systems [Volume 9, Issue 2, 2019, Pages 172-185]
Data Envelopment Analysis A Network DEA Approach to Assess Supply Chains and its Application in Medical Industry [Volume 8, Issue 1, 2018, Pages 37-48]
Data Envelopment Analysis Evaluating the Efficiency of petrochemical companies based on human resource, operations and sales functions using Data Envelopment Analysis (DEA) approach [Volume 10, Issue 3, 2020, Pages 259-267]
Data Envelopment Analysis Fixed cost allocation plan based on robust optimization in data envelopment analysis: A case study of the banking industry [Volume 14, Issue 3, 2024, Pages 272-288]
Data Envelopment Analysis Optimal stock portfolio quality management using the combination of the Markowitz model with support vector machine methods, data envelopment analysis, and DB scan [Volume 14, Issue 4, 2024, Pages 358-378]
Data mining Designing a predictive model for evaluating foundry silica sands using data mining and designing experiments (Study of group 50 sands) [Volume 13, Issue 3, 2023, Pages 281-299]
Data quality Rethinking strategic decision quality through big data: A decision architecture based on data quality, information quality, and information adoption [Volume 15, Issue 3, 2025, Pages 281-303]
DBSCAN Optimal stock portfolio quality management using the combination of the Markowitz model with support vector machine methods, data envelopment analysis, and DB scan [Volume 14, Issue 4, 2024, Pages 358-378]
Decision-making Prioritizing factors affecting the quality of managerial decision-making [Volume 15, Issue 1, 2025, Pages 1-19]
Deep Learning Determining the Factors Influencing the Prediction of Helicopter Rotor Failures [(Articles in Press)]
Defense Investment Alliance Defense Systems with Reliability Improvement Approach [Volume 6, Issue 3, 2016, Pages 146-157]
Degradation Analysis A new Degradation analysis approach for multi-component systems based on functional relationships considering stochastic dependency [Volume 13, Issue 1, 2023, Pages 1-16]
Delphi method Designing a predictive model for evaluating foundry silica sands using data mining and designing experiments (Study of group 50 sands) [Volume 13, Issue 3, 2023, Pages 281-299]
Delphi Panel Designing a conceptual model for evaluating the excellence of work units in organizations [Volume 7, Issue 2, 2017, Pages 114-128]
Delta method The parameter estimation methods for the exponential distribution under interval censored data; A comparison study [Volume 13, Issue 2, 2023, Pages 165-180]
Demand allocation Provide an integrated mathematical planning model for selecting and allocating orders for biomass power plant green suppliers [Volume 7, Issue 1, 2017, Pages 1-15]
Demand forecasting Analysis of the demand forecasting process through the supply chain and comparison of the current and desired states in the book publishing [Volume 15, Issue 3, 2025, Pages 304-315]
Dependent failure The Effect of Common Cause Failure in Predicting the Reliability of the Railway Industry [Volume 12, Issue 2, 2022, Pages 125-151]
Design for Cost (DFC) Designing a product platform architecture development model with a multi-objective approach including DFC, DFV and DFSC, Case study: Phased array antenna system [Volume 12, Issue 2, 2022, Pages 171-198]
Design for Supply Chain (DFSC) Designing a product platform architecture development model with a multi-objective approach including DFC, DFV and DFSC, Case study: Phased array antenna system [Volume 12, Issue 2, 2022, Pages 171-198]
Design for Vareity (DFV) Designing a product platform architecture development model with a multi-objective approach including DFC, DFV and DFSC, Case study: Phased array antenna system [Volume 12, Issue 2, 2022, Pages 171-198]
Design of experiments The role of design of experiment in the ecosystem of the fourth industrial revolution [Volume 13, Issue 4, 2023, Pages 373-394]
Design of experiments. Utilization of Response Surface Methodology and Goal Programming based on Simulation in a Robotic Cell to Optimize Sequencing [Volume 10, Issue 4, 2020, Pages 327-338]
Design of Experiments (DOE) Application of Design of Experiments to Investigate the Effects of Highway Traffic Control Strategies [Volume 2, Issue 1, 2012, Pages 27-36]
Design of Experiments (DOE) Application of Design of Experiments and Grey Analysis to Optimize the Surface Roughness Quality of AISI 4340 Steel in Turning Using TiN Tools [Volume 2, Issue 2, 2012, Pages 71-77]
Design office Providing a comprehensive model to define the technical requirements of complex systems in design offices [Volume 13, Issue 4, 2023, Pages 409-424]
Design structure matrix Viability Assessment Model of Complex Engineering Systems in Uncertainty - A Case Study of a Satellite [Volume 7, Issue 3, 2017, Pages 208-222]
Design to cost (DTC). knowledge base Developing a Product Design Model for a Specific Electro-Optical Product Adopting Design to Cost (DTC) Procedure [Volume 10, Issue 3, 2020, Pages 171-188]
Deterioration Estimation of the remaining useful life of equipment with gradual deterioration with condition-based maintenance policy with the presence of two failure accelerators [Volume 6, Issue 4, 2016, Pages 260-273]
Determine batch size Determining the size of the production batch using MIP models [Volume 7, Issue 1, 2017, Pages 43-59]
Developed model A Developed Framework for Estimating the Equipment' Health Indicator: A Study for Wind Tunnel Equipment [Volume 12, Issue 4, 2022, Pages 413-438]
Deviation Factor Selection (DFS) Chart Monitoring Two-Stage Processes with Gamma-Distributed Outputs Using Generalized Linear Models and the Inverse NORTA Method [Volume 2, Issue 1, 2012, Pages 50-55]
Diagnosis Detection of bearing defects of industrial machines through audiometry using neural network [Volume 6, Issue 4, 2016, Pages 274-285]
Digital advertising Prediction of the impact and performance of FinTech companies' advertisements on customer acquisition and loyalty using metaheuristic algorithms [Volume 14, Issue 3, 2024, Pages 199-216]
Digital Banking Analysis of heterogeneity and transmission mechanism of the effect of FinTech innovation on banks' risk-taking behavior (Models: DID, 2SLS-IV, GMM) [Volume 14, Issue 3, 2024, Pages 253-271]
Digital Supply Chain Analyzing the quality of digitalization in supply chain collaboration models using an integrated fuzzy BWM-TOPSIS approach [Volume 14, Issue 3, 2024, Pages 224-243]
Digital Supply Chain The impact of e-business processes on business value creation in the digital supply chain by examining the role of information sharing: An artificial neural network modeling approach [Volume 15, Issue 4, 2025, Pages 369-397]
Dimensional reduction Presenting a proposed model to identify and reduce the dimensions of variables affecting the quality of slabs with a multi-variable-multi-stage approach (Case study: Isfahan Mobarakeh steel company) [Volume 14, Issue 2, 2024, Pages 91-104]
Dimensions of service quality Provide a model to explain the relationship between quality requirements and service quality dimensions in Iranian universities [Volume 7, Issue 4, 2017, Pages 325-341]
Dimetal Analysis of key factors of customer satisfaction with airline service quality and airline ratings: A combined VIKOR-DEMATEL approach [Volume 15, Issue 3, 2025, Pages 316-338]
Discount model Mathematical model of contract selection and determining the amount of liquefied natural gas purchase taking into account the general and developmental discount [Volume 7, Issue 4, 2017, Pages 342-357]
Discrete-event simulation Simulation of transportation costs Supply chain network design taking into account price and quality dependent demand [Volume 6, Issue 1, 2016, Pages 57-65]
Dispersion matrix Introducing a new method for locating moving objects using monopole antennas and scattering matrices in order to increase the quality of service in smart parking lots [Volume 7, Issue 4, 2017, Pages 271-286]
Dispersion parameter Introducing a new method for locating moving objects using monopole antennas and scattering matrices in order to increase the quality of service in smart parking lots [Volume 7, Issue 4, 2017, Pages 271-286]
Disruption Closed loop supply chain network design under disturbance and uncertainty conditions considering quality and resilience strategy [Volume 6, Issue 2, 2016, Pages 133-145]
Disruption Simulation of transportation costs Supply chain network design taking into account price and quality dependent demand [Volume 6, Issue 1, 2016, Pages 57-65]
Distribution costs Determining the size of the production batch using MIP models [Volume 7, Issue 1, 2017, Pages 43-59]
Distribution-Free Control Charts Nonparametric control charts based on runs and Wilcoxon-type rank-sum statistics [Volume 12, Issue 3, 2022, Pages 273-298]
Double- objective design Double Objective Economic - Statistical Design under Pareto Shock models [Volume 12, Issue 1, 2022, Pages 87-102]
Dual rhythmic moving average control chart Development of cumulative sum control controls and dual rhythm moving moving averages based on generalized linear regression to monitor cascading processes [Volume 7, Issue 2, 2017, Pages 82-93]
Dynamic Positioning System Presenting a method based on PDS model and AHP technique for calculating and analyzing reliability considering the common cause failure for non-uniform components (Case study of the output of the dynamic position stabilization system of a vessel) [Volume 6, Issue 2, 2016, Pages 103-117]
Dynamic system Analysis of Effective Interactions on After-Sales Services in Iran's Liquefied Gas Industry Using DEMATEL Fuzzy [Volume 8, Issue 2, 2018, Pages 133-151]

E

E2-Bayesian estimation, General entropy loss function, M/M/c/∞ An improved E2-Bayesian estimator for the efficiency parameter of an infinite-capacity multi-server queueing system [Volume 16, Issue 1, 2026, Pages 1-14]
Early replacement A generalized integrated model of incomplete maintenance strategies, early replacement and Taguchi loss function in the economic design of X ̅ control diagram for declining processes [Volume 6, Issue 3, 2016, Pages 158-167]
Earned Value Management Functionality of T2 and MEWMA multivariable control charts in project monitoring [Volume 13, Issue 3, 2023, Pages 253-266]
E-business The impact of e-business processes on business value creation in the digital supply chain by examining the role of information sharing: An artificial neural network modeling approach [Volume 15, Issue 4, 2025, Pages 369-397]
Economic design Economic statistical design of X ̅ control chart for abnormal quality characteristic with Markov chains approach [Volume 6, Issue 2, 2016, Pages 79-91]
Economic design Economic design of X-bar control chart in flow process under Burr XII shock model with non-uniform sampling schemes [Volume 11, Issue 2, 2021, Pages 127-154]
Economic design Realistic economic-statistical design of X ̅ control chart in the presence of independent assignable causes: A critique of Chen and Yang (2002) economic model [Volume 11, Issue 3, 2021, Pages 203-220]
Economic design Title Economic-Statistical Design of Nonparametric GWMA Control Chart for Monitoring Location Parameter [Volume 13, Issue 2, 2023, Pages 111-130]
Economic statistical design Optimal Economic Statistical Design of Fully Adaptive Descriptive Control Charts for Monitoring Nonconformities [Volume 8, Issue 1, 2018, Pages 21-36]
Economic statistical design Economic statistical design of control chart for individual observations of exponential distribution [Volume 10, Issue 2, 2020, Pages 135-144]
Economic- Statistical design Double Objective Economic - Statistical Design under Pareto Shock models [Volume 12, Issue 1, 2022, Pages 87-102]
Economic-Statistical Design A Simple Approach for Robust Economic and Economic-Statistical Design of 𝑿 ̅ Control Chart [Volume 9, Issue 3, 2019, Pages 202-211]
Economic-Statistical Design Economic-Statistical Design of Control Charts for monitoring the Process Mean with Known Standard Deviation Based on Bayesian Predictive Distribution [Volume 9, Issue 4, 2019, Pages 284-294]
Electrical Systems Providing a mathematical model to measure reliability In the power distribution network [Volume 13, Issue 3, 2023, Pages 231-252]
EM Algorithm Inference on Accelerated Life Testing for One-Shot Device with Competing Risks [Volume 11, Issue 3, 2021, Pages 285-306]
EM Algorithm Bayesian inference of the parameters under the generalized power Lindley distribution based on the hybrid type-II censoring scheme: a simulation study and application [Volume 14, Issue 2, 2024, Pages 177-198]
Emergency department Developing Emergency organization resources Management Productivity to Increase the Welfare of Stroke and heart attack patients Using Statistical and Spatial Statistics Analysis in Tehran [Volume 10, Issue 2, 2020, Pages 145-158]
Energy foresight Quality improvement of conflict analysis in the worldwide gas industry using graph model scenarios and agent-based methodology [Volume 14, Issue 4, 2024, Pages 321-357]
Environmental Biology Investigating the relationship between productivity factors and performance of organizations by considering environmental indicators based on ISO 14001 standard [Volume 7, Issue 2, 2017, Pages 140-158]
Environmental uncertainty Investigating the moderating role of environmental uncertainty in ISO 9001 relationships, product innovation and financial performance (Case study: Production organizations in Isfahan province) [Volume 7, Issue 3, 2017, Pages 223-245]
Environmental uncertainty Ranking the Criteria of Quality Management System Implementation in Construction Quality Control Companies via Fuzzy Analytical Hierarchy Process [Volume 8, Issue 1, 2018, Pages 49-62]
Epsilon Constraint Developing a multi-objective mathematical model of green closed-loop supply chain In terms of selling returned products using the Epsilon-constraint method approach [Volume 11, Issue 4, 2021, Pages 351-376]
Epsilon constraint method Multi-Objective Green Agile Closed Loop Supply Chain Network Design Using Multi-objective Weed Optimization Algorithm [Volume 9, Issue 4, 2019, Pages 305-319]
Equipment A Developed Framework for Estimating the Equipment' Health Indicator: A Study for Wind Tunnel Equipment [Volume 12, Issue 4, 2022, Pages 413-438]
Erlang distribution Optimization for enhancing the quality of the queueing model family {M/E_r/1,r∈N} based on the cost function, probability of system stationary, and customer satisfaction under a finite time horizon [Volume 15, Issue 3, 2025, Pages 271-280]
Estimator The estimation of process standard deviation in statistical quality control: A review and comparison of methods [Volume 15, Issue 4, 2025, Pages 433-467]
EWMAR control chart Developing EWMAR Control Chart with Run Rules for Profile Monitoring [Volume 10, Issue 4, 2020, Pages 279-298]
EWMA sign control chart A Nonparametric GWMA Control Chart under Ranked Set Sampling for Monitoring Process Location Parameter [Volume 12, Issue 4, 2022, Pages 385-412]
EWMA Type Sign Chart Investigation of the effect of inertia on the performance of nonparametric signals of cumulative sum and rhythmic moving average [Volume 6, Issue 1, 2016, Pages 45-56]
Exceedance Statistics Nonparametric control charts based on runs and Wilcoxon-type rank-sum statistics [Volume 12, Issue 3, 2022, Pages 273-298]
Expand quality performance Improving product quality by combining fuzzy quality house and ideal planning of Bushehr Polymer Industrial Group [Volume 7, Issue 3, 2017, Pages 186-199]
Exponential Distribution Economic statistical design of control chart for individual observations of exponential distribution [Volume 10, Issue 2, 2020, Pages 135-144]
Exponential Distribution The parameter estimation methods for the exponential distribution under interval censored data; A comparison study [Volume 13, Issue 2, 2023, Pages 165-180]
Exponentially Weighted Moving Average Title Economic-Statistical Design of Nonparametric GWMA Control Chart for Monitoring Location Parameter [Volume 13, Issue 2, 2023, Pages 111-130]
Exponentially Weighted Moving Average Control Design of Risk-adjusted Bernoulli EWMA Control Chart with Estimated Parameters [Volume 9, Issue 1, 2019, Pages 1-10]
Extended warranty Integrated Price Optimization, Basic Warranty Policies and Warranty Renewal Taking into Account Products out of Warranty [Volume 8, Issue 1, 2018, Pages 63-74]
Extracorporeal Shock Wave Lithotripsy (ESWL) method Developing a Discrete-Eevent Simulation Model for Improving the Quality of Services: A Case Study in Urology Unit at a Kidney Center [Volume 9, Issue 3, 2019, Pages 244-260]
Extreme Value Distributions Investigating the Effect of Variability Reduction on Product Reliability Using Extreme Value Distributions [Volume 2, Issue 1, 2012, Pages 1-8]

F

F232G mechanical coil Estimating the reliability of the rotor assembly mechanism in the F232G mechanical spindle using fuzzy Bayesian networks [Volume 4, Issue 1, 2014, Pages 43-50]
FA control chart Optimal Economic Statistical Design of Fully Adaptive Descriptive Control Charts for Monitoring Nonconformities [Volume 8, Issue 1, 2018, Pages 21-36]
Failure Design for Reliability: Case Study HRSG Boiler [Volume 10, Issue 3, 2020, Pages 189-202]
Failure analysis Coupling failure analysis using condition monitoring data with machine learning approach [Volume 13, Issue 4, 2023, Pages 425-437]
Failure mechanism Statistical-economic design of X ̅ control chart under the newly generalized two-parameter Weibull shock model [Volume 7, Issue 2, 2017, Pages 129-139]
Failure modes and Effects Analysis Information Security Software Risk Analysis of Research Information Using Hybrid Approach of Fuzzy Failure Mode and Effect Analysis and Fuzzy Multi Criteria Decision Making [Volume 8, Issue 1, 2018, Pages 8-20]
Failure modes and Effects Analysis Provide a Model for Estimating the Reliability of a Complex Submarine Based Stage System Using an Advanced Functional Block Diagram [Volume 8, Issue 4, 2018, Pages 275-291]
Failure Modes and Effects and Criticality Analysis(FMECA) Identification and Analysis of Product Quality Risks in pharmaceutical industry (Case study: Daana Pharmaceutical Co.) [Volume 11, Issue 3, 2021, Pages 261-284]
Failure Prediction Determining the Factors Influencing the Prediction of Helicopter Rotor Failures [(Articles in Press)]
Failure Rate Provide a Model for Estimating the Reliability of a Complex Submarine Based Stage System Using an Advanced Functional Block Diagram [Volume 8, Issue 4, 2018, Pages 275-291]
Family of modela {M/Er/1 Optimization for enhancing the quality of the queueing model family {M/E_r/1,r∈N} based on the cost function, probability of system stationary, and customer satisfaction under a finite time horizon [Volume 15, Issue 3, 2025, Pages 271-280]
F.ANP A Model for relationship of Internal and External Integration of Supply Chain Vulnerabilities with Fuzzy DEMATEL and Fuzzy ANP in Electronic Domestic Appliance Industries [Volume 8, Issue 2, 2018, Pages 98-115]
Fault Tree Analysis (FTA) Estimating the reliability of the rotor assembly mechanism in the F232G mechanical spindle using fuzzy Bayesian networks [Volume 4, Issue 1, 2014, Pages 43-50]
F-Delphi Design of After-Sales Service Model with Combined ISM-Delphi Fuzzy (Case Study: LPG Industry of Iran) [Volume 9, Issue 1, 2019, Pages 50-71]
F.DEMATEL Global Competition A Model for relationship of Internal and External Integration of Supply Chain Vulnerabilities with Fuzzy DEMATEL and Fuzzy ANP in Electronic Domestic Appliance Industries [Volume 8, Issue 2, 2018, Pages 98-115]
Feature selection Determining the Factors Influencing the Prediction of Helicopter Rotor Failures [(Articles in Press)]
Feed Water System Design for Reliability: Case Study HRSG Boiler [Volume 10, Issue 3, 2020, Pages 189-202]
Financial Markets Rethinking strategic decision quality through big data: A decision architecture based on data quality, information quality, and information adoption [Volume 15, Issue 3, 2025, Pages 281-303]
Financial processes Investigating the effect of estimating ARCH model parameters on financial process control charts [Volume 7, Issue 2, 2017, Pages 106-113]
Financial Technology Analysis of heterogeneity and transmission mechanism of the effect of FinTech innovation on banks' risk-taking behavior (Models: DID, 2SLS-IV, GMM) [Volume 14, Issue 3, 2024, Pages 253-271]
Fingerprint algorithm Introducing a new method for locating moving objects using monopole antennas and scattering matrices in order to increase the quality of service in smart parking lots [Volume 7, Issue 4, 2017, Pages 271-286]
Fintech Prediction of the impact and performance of FinTech companies' advertisements on customer acquisition and loyalty using metaheuristic algorithms [Volume 14, Issue 3, 2024, Pages 199-216]
FinTech Innovation Analysis of heterogeneity and transmission mechanism of the effect of FinTech innovation on banks' risk-taking behavior (Models: DID, 2SLS-IV, GMM) [Volume 14, Issue 3, 2024, Pages 253-271]
Firefly Algorithm Optimizing and analyzing reliability through redundancy by meta-heuristic algorithms for a drone [Volume 12, Issue 3, 2022, Pages 299-318]
Fisher scoring estimation Inference on Accelerated Life Testing for One-Shot Device with Competing Risks [Volume 11, Issue 3, 2021, Pages 285-306]
Fixed cost allocation Fixed cost allocation plan based on robust optimization in data envelopment analysis: A case study of the banking industry [Volume 14, Issue 3, 2024, Pages 272-288]
Flexible manufacturing Presenting a fuzzy mathematical programming model for allocating and scheduling parts in a flexible manufacturing system (FMS) and the impact of repairs and maintenance on product quality [Volume 14, Issue 2, 2024, Pages 105-126]
FMEA Evaluation and modeling of Permasin engine reliability with the aim of improving its performance [Volume 13, Issue 1, 2023, Pages 43-58]
Food industries Proposing an Integrated Approach for Total Quality Management Using Soft System Methodology – The Case of a Food Industrial Company [Volume 8, Issue 2, 2018, Pages 116-132]
Foo methodology Allocating Reliability adopting Subsystem Resilience Approach taking up Foo Method [Volume 13, Issue 2, 2023, Pages 147-164]
Fourth Industrial Revolution Designing the establishment and implementation model of quality 4.0 with the integrated approach of interpretive structural modeling and structural equation modeling [Volume 12, Issue 1, 2022, Pages 51-68]
Fourth Industrial Revolution The role of design of experiment in the ecosystem of the fourth industrial revolution [Volume 13, Issue 4, 2023, Pages 373-394]
Fourth Industrial Revolution (Industry 4.0) An analysis of the barriers to the implementation of quality 4.0 utilizing the approach fuzzy DANP [Volume 14, Issue 4, 2024, Pages 304-320]
Fractional model Bayesian estimation of fractional Ornstein-Uhlenbeck model parameters using the sir algorithm in financial derivatives pricing [Volume 14, Issue 3, 2024, Pages 217-223]
Fractional Ornstein Uhlenbeck model Bayesian estimation of fractional Ornstein-Uhlenbeck model parameters using the sir algorithm in financial derivatives pricing [Volume 14, Issue 3, 2024, Pages 217-223]
Fragmentary regression model Development of a piecemeal regression-based approach for monitoring multiple linear profiles with phase interactions [Volume 6, Issue 4, 2016, Pages 237-249]
Frailty regression model Monitoring Zero-inflated Poisson Processes based on Model-based Cumulative Sum(CUSUM) [Volume 12, Issue 4, 2022, Pages 439-460]
Free-trade-industrial zones and special economic zones Identifying and prioritizing quantitative and qualitative variables predicting the success of investment projects in modeling perceptron neural network for quality management in free and special economic zones of the country [Volume 7, Issue 3, 2017, Pages 159-175]
Fruit supply chain A multi-objective mathematical model for designing the fruit supply chain based on the quality and sustainable development goals [Volume 15, Issue 2, 2025, Pages 180-203]
Functional approach Developing a new functional capability index C_p^''' (Profile) for a simple linear profile with asymmetric tolerance [Volume 12, Issue 3, 2022, Pages 357-384]
Functional Block Diagram Provide a Model for Estimating the Reliability of a Complex Submarine Based Stage System Using an Advanced Functional Block Diagram [Volume 8, Issue 4, 2018, Pages 275-291]
Functional requirement How to choice the effective conceptual design on basis of functional and non-functional requirement in conceptual design stage for a submarine of class H [Volume 8, Issue 3, 2018, Pages 169-181]
Fuzzy Development of a Time-Based Segmentation Method for Phase I Profile Monitoring [Volume 1, Issue 1, 2011, Pages 28-38]
Fuzzy Analytical Hierarchy Process Ranking the Criteria of Quality Management System Implementation in Construction Quality Control Companies via Fuzzy Analytical Hierarchy Process [Volume 8, Issue 1, 2018, Pages 49-62]
Fuzzy Analytic Hierarchy Process (FAHP) Identification and Ranking of Quality Dimensions in Service Organizations: A Case Study of Pasargad Bank [Volume 2, Issue 3, 2012, Pages 153-161]
Fuzzy best-worst approach A multi-objective mathematical model for designing the fruit supply chain based on the quality and sustainable development goals [Volume 15, Issue 2, 2025, Pages 180-203]
Fuzzy DANP An analysis of the barriers to the implementation of quality 4.0 utilizing the approach fuzzy DANP [Volume 14, Issue 4, 2024, Pages 304-320]
Fuzzy Data Envelopment Analysis A data-driven decision-making model for supplier selection in the LARG supply chain management with emphasis on the cultural dimension [Volume 15, Issue 2, 2025, Pages 148-179]
Fuzzy Delphi Designing an intelligent expert system for identification of sustainable supply chain multi capabilities [Volume 10, Issue 2, 2020, Pages 121-133]
Fuzzy Delphi Method An integrated FDM-FSWARA-FCOPRAS approach for choosing quality management practice in tile and ceramic SMEs in Iran [Volume 14, Issue 4, 2024, Pages 289-303]
Fuzzy DEMATEL technique Designing a causal model to improve the quality of supervision of banks and credit institutions based on the type of mission [Volume 15, Issue 2, 2025, Pages 110-136]
Fuzzy interface Evaluating the capability of artificial intelligence in predicting the amount of electrical conductivity and nitrate in underground water resources (a case study of artificial neural methods ANN and ANFIS) [Volume 13, Issue 2, 2023, Pages 207-230]
Fuzzy logic Providing a Combined Approach to Fuzzy QFD and Mathematical Planning (Case Study: Life Insurance) [Volume 6, Issue 2, 2016, Pages 118-132]
Fuzzy logic Improving product quality by combining fuzzy quality house and ideal planning of Bushehr Polymer Industrial Group [Volume 7, Issue 3, 2017, Pages 186-199]
Fuzzy logic Evaluation and improvement of human reliability capabilities in using short and medium range radar system by CREAM fuzzy method [Volume 11, Issue 4, 2021, Pages 339-350]
Fuzzy logic Proposing a conceptual model for influential factors in determining the aggregation coefficient in production planning using fuzzy interpretive structural modeling [Volume 15, Issue 1, 2025, Pages 67-82]
Fuzzy Perceptual Mapping Identifying and Analyzing Scenarios of Maintenance System Assessment Using Grounded Theory and Fuzzy Cognitive Maps [Volume 9, Issue 1, 2019, Pages 27-49]
Fuzzy reliability Fuzzy Reliability Modeling in an Aluminum Powder Production System [Volume 1, Issue 1, 2011, Pages 14-20]
Fuzzy reliability A Multi-Objective Optimization Model for Fuzzy Reliability and Its Solution Using the Simulated Annealing Algorithm [Volume 2, Issue 3, 2012, Pages 123-131]
Fuzzy set Fuzzy Reliability Modeling in an Aluminum Powder Production System [Volume 1, Issue 1, 2011, Pages 14-20]
Fuzzy SWARA An integrated FDM-FSWARA-FCOPRAS approach for choosing quality management practice in tile and ceramic SMEs in Iran [Volume 14, Issue 4, 2024, Pages 289-303]
Fuzzy theory Prioritization of airline company insurance risks using the GFAHP method [Volume 13, Issue 3, 2023, Pages 299-316]
Fuzzy theory Estimating the reliability of the rotor assembly mechanism in the F232G mechanical spindle using fuzzy Bayesian networks [Volume 4, Issue 1, 2014, Pages 43-50]

G

Games Theory Investment Alliance Defense Systems with Reliability Improvement Approach [Volume 6, Issue 3, 2016, Pages 146-157]
Gamma distribution Comparison of Adaptive Control Charts for Non-Normal Data Using Simulation [Volume 1, Issue 1, 2011, Pages 45-55]
Gamma process Reliability of degrading load sharing k-out-of-n:F system [Volume 11, Issue 2, 2021, Pages 177-190]
GARCH Improving the quality of statistical modeling of wind speed volatilities using GARCH and asymmetric GARCH models (Ardebil Meteorological Station) [Volume 12, Issue 3, 2022, Pages 343-356]
General generator function Multi-objective problem optimization of redundancy allocation and reliability in series-parallel multi-state systems [Volume 7, Issue 3, 2017, Pages 176-185]
Generalized Economic Design Combining Taguchi loss function and economic design of X ̅ control diagrams in the presence of normal and abnormal data [Volume 6, Issue 1, 2016, Pages 1-8]
Generalized integrated economic model A generalized integrated model of incomplete maintenance strategies, early replacement and Taguchi loss function in the economic design of X ̅ control diagram for declining processes [Volume 6, Issue 3, 2016, Pages 158-167]
Generalized inverse exponential distribution Estimation of reliability parameter for inverted exponential generalized distribution based on type 2 incremental censorship samples [Volume 10, Issue 1, 2020, Pages 60-74]
Generalized Linear Models (GLM) Monitoring Two-Stage Processes with Gamma-Distributed Outputs Using Generalized Linear Models and the Inverse NORTA Method [Volume 2, Issue 1, 2012, Pages 50-55]
Generalized shock model Statistical-economic design of X ̅ control diagram for correlated data under generalized shock and Weibull models [Volume 7, Issue 3, 2017, Pages 200-207]
Generalized Weighted Moving Average Title Economic-Statistical Design of Nonparametric GWMA Control Chart for Monitoring Location Parameter [Volume 13, Issue 2, 2023, Pages 111-130]
Genetic algorithm Presenting a fuzzy mathematical programming model for allocating and scheduling parts in a flexible manufacturing system (FMS) and the impact of repairs and maintenance on product quality [Volume 14, Issue 2, 2024, Pages 105-126]
Genetic Algorithm Economic statistical design of X ̅ control chart for abnormal quality characteristic with Markov chains approach [Volume 6, Issue 2, 2016, Pages 79-91]
Genetic Algorithm Integrating the Taguchi Loss Approach into the Economic Statistical Design of the X ̅ Control Chart Using an Asymmetric Loss Function [Volume 7, Issue 4, 2017, Pages 287-305]
Genetic Algorithm Supply Chain Quality Management in Transportation Routing Using Genetic Algorithm [Volume 10, Issue 3, 2020, Pages 227-234]
Genetic Algorithm Optimizing and analyzing reliability through redundancy by meta-heuristic algorithms for a drone [Volume 12, Issue 3, 2022, Pages 299-318]
Genetic Algorithm Optimizing reliability-redundancy problem with active and cold-standby strategy with triangular fuzzy number approach [Volume 13, Issue 1, 2023, Pages 17-42]
Genetic Algorithm Multi-state series–parallel system optimization using the genetic algorithm [Volume 5, Issue 1, 2015, Pages 13-22]
Genetic Algorithm Providing an exact mathematical model for process planning and advanced scheduling with the aim of reducing quality costs [Volume 2, Issue 3, 2012, Pages 105-115]
Genetic Algorithm Estimation of Weibull distribution parameters using a genetic algorithm [Volume 15, Issue 4, 2025, Pages 415-432]
Genetic Algorithm A Simple Approach for Robust Economic and Economic-Statistical Design of 𝑿 ̅ Control Chart [Volume 9, Issue 3, 2019, Pages 202-211]
Genetic Algorithm Optimization of Control Charts with Multi-Stage Sampling Using Genetic Algorithm [Volume 8, Issue 3, 2018, Pages 214-223]
Genetic algorithm based on the arrangement of insignificant excellent answers Provide an efficient model to increase the accessibility of systems with repairable and non-repairable parts as a multi-objective problem of allocating surplus components [Volume 6, Issue 3, 2016, Pages 191-203]
Genetic algorithm (GA) Economic-statistical design of Bayesian control chart based on the predictive distribution for individual observations with an exponential qualitative characteristic distribution [Volume 12, Issue 2, 2022, Pages 153-169]
Genetic algorithm with unfavorable sorting Multi-objective problem optimization of redundancy allocation and reliability in series-parallel multi-state systems [Volume 7, Issue 3, 2017, Pages 176-185]
Geometric probability distribution Forecasting the Customer Lifetime Value by the Developed RFM Model: A Case Study in Insurance [Volume 8, Issue 4, 2018, Pages 327-336]
Global Criterion Method A Multi-Objective Optimization Model for Fuzzy Reliability and Its Solution Using the Simulated Annealing Algorithm [Volume 2, Issue 3, 2012, Pages 123-131]
Global gas market Quality improvement of conflict analysis in the worldwide gas industry using graph model scenarios and agent-based methodology [Volume 14, Issue 4, 2024, Pages 321-357]
Gray theory Statistical-economic design of np control chart using multi-objective optimization and DEA with gray values [Volume 6, Issue 3, 2016, Pages 168-179]
Gray wolf algorithm Presenting a fuzzy mathematical programming model for allocating and scheduling parts in a flexible manufacturing system (FMS) and the impact of repairs and maintenance on product quality [Volume 14, Issue 2, 2024, Pages 105-126]
Green supply chain Combination of Robust Optimization and Risk Management to Design Closed-Loop Green Supply Chain Network [Volume 9, Issue 2, 2019, Pages 186-201]
Green supply chain Designing an integrated green supply chain model with an emphasis on improving environmental quality and increasing customer satisfaction [Volume 15, Issue 1, 2025, Pages 31-49]
Grey Analysis Application of Design of Experiments and Grey Analysis to Optimize the Surface Roughness Quality of AISI 4340 Steel in Turning Using TiN Tools [Volume 2, Issue 2, 2012, Pages 71-77]
Groundwater Evaluating the capability of artificial intelligence in predicting the amount of electrical conductivity and nitrate in underground water resources (a case study of artificial neural methods ANN and ANFIS) [Volume 13, Issue 2, 2023, Pages 207-230]
Group decision making Prioritization of airline company insurance risks using the GFAHP method [Volume 13, Issue 3, 2023, Pages 299-316]
GWMA sign control chart A Nonparametric GWMA Control Chart under Ranked Set Sampling for Monitoring Process Location Parameter [Volume 12, Issue 4, 2022, Pages 385-412]

H

Health Index A Developed Framework for Estimating the Equipment' Health Indicator: A Study for Wind Tunnel Equipment [Volume 12, Issue 4, 2022, Pages 413-438]
Heart attack Developing Emergency organization resources Management Productivity to Increase the Welfare of Stroke and heart attack patients Using Statistical and Spatial Statistics Analysis in Tehran [Volume 10, Issue 2, 2020, Pages 145-158]
Heat Recovery Steam Generator Design for Reliability: Case Study HRSG Boiler [Volume 10, Issue 3, 2020, Pages 189-202]
Helicopter Rotor Determining the Factors Influencing the Prediction of Helicopter Rotor Failures [(Articles in Press)]
Heston model Bayesian estimation of fractional Ornstein-Uhlenbeck model parameters using the sir algorithm in financial derivatives pricing [Volume 14, Issue 3, 2024, Pages 217-223]
Heterogeneity Analysis Analysis of heterogeneity and transmission mechanism of the effect of FinTech innovation on banks' risk-taking behavior (Models: DID, 2SLS-IV, GMM) [Volume 14, Issue 3, 2024, Pages 253-271]
Hidden costs Provide a method to calculate the hidden costs and quality opportunities with the approach of harm to the goodwill of customers and the brand of the organization [Volume 11, Issue 1, 2021, Pages 1-14]
Holt Winters Sturdy Control Charts for Time Series Data [Volume 10, Issue 4, 2020, Pages 269-278]
Home Appliance Industries Designing a Service Supply Chain Performance Evaluation Model Using Neural-Fuzzy Networks to Increase Service Quality and Productivity (Case Study: Home Appliance Companies in Iran) [Volume 8, Issue 3, 2018, Pages 182-202]
Hospital Ranking of selected hospitals in Iran in terms of service quality with a combination of SERVQUAL methods and data envelopment analysis [Volume 6, Issue 3, 2016, Pages 180-190]
Hotelling diagram Functionality of T2 and MEWMA multivariable control charts in project monitoring [Volume 13, Issue 3, 2023, Pages 253-266]
Human Resource Management Identification and Ranking of Key Success Factors of Total Quality Management with Fuzzy Dimtel Approach and Analysis of Fuzzy Networks (Case Study: Akhshan Manufacturing Company) [Volume 9, Issue 1, 2019, Pages 80-100]
Hybrid type I censoring Determining optimal scheme in type I Hybrid censoring from Burr type XII distribution based on cost function [Volume 11, Issue 2, 2021, Pages 191-202]

I

Ideal planning Improving product quality by combining fuzzy quality house and ideal planning of Bushehr Polymer Industrial Group [Volume 7, Issue 3, 2017, Pages 186-199]
Idea to product process Advanced product quality planning model in a defense organization [Volume 7, Issue 4, 2017, Pages 306-324]
Image data A Spatiotemporal Model for Monitoring and Analysis of Product Color, Case Study: Dairy Products [Volume 9, Issue 2, 2019, Pages 138-153]
Improving reliability Investigating the Effect of Variability Reduction on Product Reliability Using Extreme Value Distributions [Volume 2, Issue 1, 2012, Pages 1-8]
Improving supervision Designing a causal model to improve the quality of supervision of banks and credit institutions based on the type of mission [Volume 15, Issue 2, 2025, Pages 110-136]
Improving the quality of services Developing a Discrete-Eevent Simulation Model for Improving the Quality of Services: A Case Study in Urology Unit at a Kidney Center [Volume 9, Issue 3, 2019, Pages 244-260]
Incomplete maintenance A generalized integrated model of incomplete maintenance strategies, early replacement and Taguchi loss function in the economic design of X ̅ control diagram for declining processes [Volume 6, Issue 3, 2016, Pages 158-167]
Increasing type 2 censorship Estimation of reliability parameter for inverted exponential generalized distribution based on type 2 incremental censorship samples [Volume 10, Issue 1, 2020, Pages 60-74]
Incremental failure rate A generalized integrated model of incomplete maintenance strategies, early replacement and Taguchi loss function in the economic design of X ̅ control diagram for declining processes [Volume 6, Issue 3, 2016, Pages 158-167]
Incremental link censorship. Bayesian Inference Parameter Reliability in Two-Parameter Riley Distribution under Increasingly Censored Bond Samples [Volume 10, Issue 2, 2020, Pages 159-168]
Independent spatial covariates A novel approach to nonparametric estimation of the intensity function of spatial Poisson point processes and its application in estimating the Intensity of Inga Sapindoides trees [Volume 13, Issue 3, 2023, Pages 317-334]
Index Investigating the relationship between productivity factors and performance of organizations by considering environmental indicators based on ISO 14001 standard [Volume 7, Issue 2, 2017, Pages 140-158]
Indexing Analysis and calculation of Iran's composite quality index using the Shannon entropy approach [Volume 14, Issue 2, 2024, Pages 145-161]
Individual observations Design of an adaptive control chart with variable sampling intervals using the maximum exponentially weighted moving average (EWMA) of squared deviations [Volume 5, Issue 1, 2015, Pages 1-12]
Indoor location Introducing a new method for locating moving objects using monopole antennas and scattering matrices in order to increase the quality of service in smart parking lots [Volume 7, Issue 4, 2017, Pages 271-286]
Industry 4.0 Designing the establishment and implementation model of quality 4.0 with the integrated approach of interpretive structural modeling and structural equation modeling [Volume 12, Issue 1, 2022, Pages 51-68]
Industry 4.0 Analyzing the quality of digitalization in supply chain collaboration models using an integrated fuzzy BWM-TOPSIS approach [Volume 14, Issue 3, 2024, Pages 224-243]
Industry 4/0 technologies Hybrid PLSANN modeling to investigate the mediating role of Industry 4.0 technologies and customer satisfaction in the relationship between quality management practices and organizational performance [Volume 15, Issue 4, 2025, Pages 339-368]
Inertia Investigation of the effect of inertia on the performance of nonparametric signals of cumulative sum and rhythmic moving average [Volume 6, Issue 1, 2016, Pages 45-56]
Inflation. Designing a Model for Estimating the Cost of Pro-Rata Warranty with limitation of Each Failure Rectification Cost under Inflationary Conditions [Volume 9, Issue 1, 2019, Pages 72-79]
Influential variables Monitoring Zero-inflated Poisson Processes based on Model-based Cumulative Sum(CUSUM) [Volume 12, Issue 4, 2022, Pages 439-460]
Information adoption Rethinking strategic decision quality through big data: A decision architecture based on data quality, information quality, and information adoption [Volume 15, Issue 3, 2025, Pages 281-303]
Information security Information Security Software Risk Analysis of Research Information Using Hybrid Approach of Fuzzy Failure Mode and Effect Analysis and Fuzzy Multi Criteria Decision Making [Volume 8, Issue 1, 2018, Pages 8-20]
Infrared Identification of Defects in Power Distribution Panels Using Spatial Control Charts [Volume 2, Issue 2, 2012, Pages 89-96]
Inhomogeneous spatial Poisson point process A novel approach to nonparametric estimation of the intensity function of spatial Poisson point processes and its application in estimating the Intensity of Inga Sapindoides trees [Volume 13, Issue 3, 2023, Pages 317-334]
Innovation Developing compatibility model of Iran’s handmade carpet industry emphasizing quality and innovation factors [Volume 13, Issue 4, 2023, Pages 395-408]
Instrumental Relationship Title: Measurement System Analysis: A Fuzzy model for Tool Capability [Volume 8, Issue 3, 2018, Pages 203-213]
Insurance Risk Prioritization of airline company insurance risks using the GFAHP method [Volume 13, Issue 3, 2023, Pages 299-316]
Integrated Hazard over Sampling Intervals Combining Taguchi loss function and economic design of X ̅ control diagrams in the presence of normal and abnormal data [Volume 6, Issue 1, 2016, Pages 1-8]
Integrated Supply Chain A Model for relationship of Internal and External Integration of Supply Chain Vulnerabilities with Fuzzy DEMATEL and Fuzzy ANP in Electronic Domestic Appliance Industries [Volume 8, Issue 2, 2018, Pages 98-115]
Integrating Value Integrating Value Analysis Based on Supply Chain Flexibility by Interpretive Ranking Process (IRP) (Case Study: Petrochemical Industry) [Volume 10, Issue 3, 2020, Pages 235-258]
Interface function Development of cumulative sum control controls and dual rhythm moving moving averages based on generalized linear regression to monitor cascading processes [Volume 7, Issue 2, 2017, Pages 82-93]
Internet of Things Medical image transmission in multi-state synchronization of chaotic systems using polynomial fuzzy modeling [Volume 14, Issue 3, 2024, Pages 244-252]
Interpretive Ranking Process (IRP) Integrating Value Analysis Based on Supply Chain Flexibility by Interpretive Ranking Process (IRP) (Case Study: Petrochemical Industry) [Volume 10, Issue 3, 2020, Pages 235-258]
Interpretive Ranking Process (IRP) Interpretive Prioritization of Sustainable Outsourcing Risk Control Based on Capacity Supply Chain Capabilities Based on Analysis Interpretive Ranking Process (IRP) [Volume 10, Issue 3, 2020, Pages 203-226]
Interpretive structural modeling Proposing a conceptual model for influential factors in determining the aggregation coefficient in production planning using fuzzy interpretive structural modeling [Volume 15, Issue 1, 2025, Pages 67-82]
Interval censoring The parameter estimation methods for the exponential distribution under interval censored data; A comparison study [Volume 13, Issue 2, 2023, Pages 165-180]
Interval type-2 fuzzy sets Developing the Sign and Signed Rank Non-parametric Control Charts by Using Interval Type-2 Fuzzy Sets [Volume 12, Issue 3, 2022, Pages 251-272]
Inverse NORTA Method Monitoring Two-Stage Processes with Gamma-Distributed Outputs Using Generalized Linear Models and the Inverse NORTA Method [Volume 2, Issue 1, 2012, Pages 50-55]
Investment allocation Investment Alliance Defense Systems with Reliability Improvement Approach [Volume 6, Issue 3, 2016, Pages 146-157]
Investment plans Identifying and prioritizing quantitative and qualitative variables predicting the success of investment projects in modeling perceptron neural network for quality management in free and special economic zones of the country [Volume 7, Issue 3, 2017, Pages 159-175]
Iran Analysis and calculation of Iran's composite quality index using the Shannon entropy approach [Volume 14, Issue 2, 2024, Pages 145-161]
Iran Liquefied Gas Industry Design of After-Sales Service Model with Combined ISM-Delphi Fuzzy (Case Study: LPG Industry of Iran) [Volume 9, Issue 1, 2019, Pages 50-71]
Islamic Azad University Provide a model to explain the relationship between quality requirements and service quality dimensions in Iranian universities [Volume 7, Issue 4, 2017, Pages 325-341]
ISM Design of After-Sales Service Model with Combined ISM-Delphi Fuzzy (Case Study: LPG Industry of Iran) [Volume 9, Issue 1, 2019, Pages 50-71]
ISO 9001 Investigating the moderating role of environmental uncertainty in ISO 9001 relationships, product innovation and financial performance (Case study: Production organizations in Isfahan province) [Volume 7, Issue 3, 2017, Pages 223-245]
ISO 9001 certification Investigating the Receiving of ISO 9001 Certification on the Value of Participating in the Life Cycle [Volume 10, Issue 4, 2020, Pages 313-326]

L

L1-norm Improving The Quality of Time Series Modeling and Forecasting Using Robust Multivariate Singular Spectrum Analysis [Volume 12, Issue 4, 2022, Pages 495-520]
L*a*b* color space A Spatiotemporal Model for Monitoring and Analysis of Product Color, Case Study: Dairy Products [Volume 9, Issue 2, 2019, Pages 138-153]
Lack of resources Mathematical modeling of resource allocation in critical conditions with the aim of increasing the level of resilience of operational processes: the case study of the textile industry [Volume 11, Issue 4, 2021, Pages 393-412]
LASSO Bayesian Shirinkage Variable Selection with Non-Local Priors in Ultrahigh-Dimensional Logistic Generalized Linear Models [Volume 12, Issue 2, 2022, Pages 103-124]
Layout Improving the Quality of Design in Multicomponent Systems via Layout Optimization Towards Better Performance and Serviceability [Volume 10, Issue 4, 2020, Pages 299-312]
Lean Six Sigma (LSS) Measuring the Efficiency of Lean Six Sigma (LSS) Projects in the Banking Industry Using the Hybrid Approach of Modified Balanced Scorecard (MBSC) and Multi Criteria Decision Making (MCDM) [Volume 9, Issue 4, 2019, Pages 346-358]
Life ensuring services Providing a Combined Approach to Fuzzy QFD and Mathematical Planning (Case Study: Life Insurance) [Volume 6, Issue 2, 2016, Pages 118-132]
Likelihood Ratio Test (LRT) Developing Control Charts for Statistical Monitoring of a Dynamic Network of Emergency Service [Volume 11, Issue 4, 2021, Pages 377-392]
Linamp method Mathematical model of contract selection and determining the amount of liquefied natural gas purchase taking into account the general and developmental discount [Volume 7, Issue 4, 2017, Pages 342-357]
Lindley approximation Bayesian Inference Parameter Reliability in Two-Parameter Riley Distribution under Increasingly Censored Bond Samples [Volume 10, Issue 2, 2020, Pages 159-168]
Linear Profile Examination of the Effect of Measurement Error on the Response Variable of Linear Profiles Using the Classical Model [Volume 2, Issue 2, 2012, Pages 65-70]
Liquefied Natural Gas Mathematical model of contract selection and determining the amount of liquefied natural gas purchase taking into account the general and developmental discount [Volume 7, Issue 4, 2017, Pages 342-357]
Load sharing Reliability of degrading load sharing k-out-of-n:F system [Volume 11, Issue 2, 2021, Pages 177-190]
Loan Allocation Model Optimal loan allocation model with emphasis on reducing non-performing loans in private banks [Volume 14, Issue 4, 2024, Pages 407-422]
Location parameter A Nonparametric GWMA Control Chart under Ranked Set Sampling for Monitoring Process Location Parameter [Volume 12, Issue 4, 2022, Pages 385-412]
Logistic regression model Provide a method for monitoring the quality of two-stage thyroid cancer surgery using a logistic risk adjustment model [Volume 6, Issue 2, 2016, Pages 92-102]
Long-term memory models Bayesian estimation of fractional Ornstein-Uhlenbeck model parameters using the sir algorithm in financial derivatives pricing [Volume 14, Issue 3, 2024, Pages 217-223]
LPG Analysis of Effective Interactions on After-Sales Services in Iran's Liquefied Gas Industry Using DEMATEL Fuzzy [Volume 8, Issue 2, 2018, Pages 133-151]
Lp metric method A multi-Objective Optimization Mathematical Model for Design and Planning of Sustainable Resilience Supply Chain under the Risk of Supply Disruption [Volume 9, Issue 3, 2019, Pages 212-225]

M

Machine Learning Coupling failure analysis using condition monitoring data with machine learning approach [Volume 13, Issue 4, 2023, Pages 425-437]
Machine Learning A data-driven decision-making model for supplier selection in the LARG supply chain management with emphasis on the cultural dimension [Volume 15, Issue 2, 2025, Pages 148-179]
Machine Learning Analysis of the demand forecasting process through the supply chain and comparison of the current and desired states in the book publishing [Volume 15, Issue 3, 2025, Pages 304-315]
Machine vision system A Spatiotemporal Model for Monitoring and Analysis of Product Color, Case Study: Dairy Products [Volume 9, Issue 2, 2019, Pages 138-153]
Maintenance and repair assessment criteria Identifying and Analyzing Scenarios of Maintenance System Assessment Using Grounded Theory and Fuzzy Cognitive Maps [Volume 9, Issue 1, 2019, Pages 27-49]
Maintenance and repair system evaluation Identifying and Analyzing Scenarios of Maintenance System Assessment Using Grounded Theory and Fuzzy Cognitive Maps [Volume 9, Issue 1, 2019, Pages 27-49]
Management Accountants Total quality management and performance: Empirical evidence of the mediating role of management accountants and the management accounting system [Volume 15, Issue 2, 2025, Pages 231-246]
Management Commitment Identification and Ranking of Key Success Factors of Total Quality Management with Fuzzy Dimtel Approach and Analysis of Fuzzy Networks (Case Study: Akhshan Manufacturing Company) [Volume 9, Issue 1, 2019, Pages 80-100]
Management Commitment Identifying and categorizing the components of management commitment in implementing business excellence models [Volume 4, Issue 1, 2014, Pages 64-76]
Markov Reliability and Accessibility of Redundant Systems With the Markov Model Approach [Volume 10, Issue 1, 2020, Pages 75-85]
Markov chain Optimal Economic Statistical Design of Fully Adaptive Descriptive Control Charts for Monitoring Nonconformities [Volume 8, Issue 1, 2018, Pages 21-36]
Markov chain Forecasting the Customer Lifetime Value by the Developed RFM Model: A Case Study in Insurance [Volume 8, Issue 4, 2018, Pages 327-336]
Markov chain Estimating the availability of CNC milling machine using Markov chain [Volume 11, Issue 2, 2021, Pages 107-126]
Markov chain Statistical-economic design of control charts RNLMVSIT2 [Volume 14, Issue 2, 2024, Pages 162-176]
Markov chain Bi-objective optimization of active redundancy allocation in the electrical power distribution system of a marine vessel considering load sharing and a single repairman [Volume 16, Issue 1, 2026, Pages 15-38]
Markov Chain. Optimizing Redundancy and Inventory of Spare Equipment with Regard to Reliability in Multi-State Systems [Volume 10, Issue 4, 2020, Pages 339-353]
Markov Chains Economic statistical design of X ̅ control chart for abnormal quality characteristic with Markov chains approach [Volume 6, Issue 2, 2016, Pages 79-91]
Markowitz Model Presenting a model for the optimal allocation of human resources to operational processes using the Markowitz model: A case study in urology unit at a kidney center [Volume 11, Issue 1, 2021, Pages 77-87]
Markowitz Model Optimal stock portfolio quality management using the combination of the Markowitz model with support vector machine methods, data envelopment analysis, and DB scan [Volume 14, Issue 4, 2024, Pages 358-378]
Mathematical Modeling Designing a new multi-objective mathematical model for scheduling multifunctional machines taking into account the quality of manufactured parts [Volume 9, Issue 2, 2019, Pages 124-137]
Mathematical optimization model Evaluation of engineering designs with a future engineering approach [Volume 11, Issue 3, 2021, Pages 243-260]
Maximum Likelihood Estimation (MLE) Change-Point Estimation in the Mean of a Two-Attribute Attribute Process with a Binomial Distribution [Volume 2, Issue 1, 2012, Pages 15-20]
Maximum likelihood estimator Estimation of reliability parameter for inverted exponential generalized distribution based on type 2 incremental censorship samples [Volume 10, Issue 1, 2020, Pages 60-74]
Maximum likelihood estimator Detection of Change Points in Poisson Regression Profiles with a Linear Trend [Volume 1, Issue 1, 2011, Pages 39-44]
Maximum likelihood method Bayesian estimation of fractional Ornstein-Uhlenbeck model parameters using the sir algorithm in financial derivatives pricing [Volume 14, Issue 3, 2024, Pages 217-223]
Mean Squared Error Estimating the parameters of two-parameter exponential distribution under random censoring with the presence of outlier data and determining the warranty period related to product quality. [Volume 12, Issue 1, 2022, Pages 15-38]
Mean Squared Error The estimation of process standard deviation in statistical quality control: A review and comparison of methods [Volume 15, Issue 4, 2025, Pages 433-467]
Measurement error Examination of the Effect of Measurement Error on the Response Variable of Linear Profiles Using the Classical Model [Volume 2, Issue 2, 2012, Pages 65-70]
Measurement error Investigating the effect of measurement error on the performance of the signal control chart [Volume 4, Issue 1, 2014, Pages 23-32]
Measurement System Analysis Title: Measurement System Analysis: A Fuzzy model for Tool Capability [Volume 8, Issue 3, 2018, Pages 203-213]
Measurement uncertainty Assess and Address the Risks of Decision Making in the Conformity Assessment Arocess [Volume 9, Issue 4, 2019, Pages 320-333]
Mechanism Analysis Analysis of heterogeneity and transmission mechanism of the effect of FinTech innovation on banks' risk-taking behavior (Models: DID, 2SLS-IV, GMM) [Volume 14, Issue 3, 2024, Pages 253-271]
Medical image transmission Medical image transmission in multi-state synchronization of chaotic systems using polynomial fuzzy modeling [Volume 14, Issue 3, 2024, Pages 244-252]
Medium-density fiberboard Designing a supply chain network for agricultural waste from the country's palm groves [Volume 14, Issue 1, 2024, Pages 31-45]
Meta Heuristic Algorithm Multi-Objective Modeling of a Reverse Supply Chain by Robust in the Uncertainty of Demand Conditions Using a Meta-Heuristic Algorithm (NSGA-II) in Steel Industry [Volume 8, Issue 4, 2018, Pages 242-258]
Metaheuristic Algorithms Prediction of the impact and performance of FinTech companies' advertisements on customer acquisition and loyalty using metaheuristic algorithms [Volume 14, Issue 3, 2024, Pages 199-216]
Meta- heuristics. Modeling and Solving the Stochastic Problem of Maximum Coverage of Multi-Preventive Facilities with Meta-Heuristic Algorithms [Volume 9, Issue 2, 2019, Pages 154-171]
Meta-Synthesis Integrating Value Analysis Based on Supply Chain Flexibility by Interpretive Ranking Process (IRP) (Case Study: Petrochemical Industry) [Volume 10, Issue 3, 2020, Pages 235-258]
Metropolis-Hastings Algorithm Study of Micro-Droplet Splashing in Coating Processes Using the Reliability Model Based on Censored Data [Volume 10, Issue 2, 2020, Pages 86-101]
MEWMA Functionality of T2 and MEWMA multivariable control charts in project monitoring [Volume 13, Issue 3, 2023, Pages 253-266]
MicroDroplet Splashing Study of Micro-Droplet Splashing in Coating Processes Using the Reliability Model Based on Censored Data [Volume 10, Issue 2, 2020, Pages 86-101]
Minimum angle method Developing a New Optimization Model Based on the Process Yield Index and the Process Capability Index for Resubmitted lots [Volume 9, Issue 4, 2019, Pages 334-345]
MIP models Determining the size of the production batch using MIP models [Volume 7, Issue 1, 2017, Pages 43-59]
Mixed Approach Providing a model of quality management system in FinTech startups [Volume 11, Issue 1, 2021, Pages 33-44]
Mixture Distribution Determining the optimal time policy model for the products with multiple failure states by considering a mixture distribution [Volume 15, Issue 2, 2025, Pages 137-147]
Mobarakeh steel. Slab Presenting a proposed model to identify and reduce the dimensions of variables affecting the quality of slabs with a multi-variable-multi-stage approach (Case study: Isfahan Mobarakeh steel company) [Volume 14, Issue 2, 2024, Pages 91-104]
Modeling Integration of Six Sigma Methodology and Discrete-Event System Simulation for Quality Improvement and Reduction of Cold Material in the Smelting Plant of Sarcheshmeh Copper Complex [Volume 2, Issue 3, 2012, Pages 142-152]
Modified Balanced Scorecard (MBSC) Measuring the Efficiency of Lean Six Sigma (LSS) Projects in the Banking Industry Using the Hybrid Approach of Modified Balanced Scorecard (MBSC) and Multi Criteria Decision Making (MCDM) [Volume 9, Issue 4, 2019, Pages 346-358]
Monte carlo Markov chain Bayesian inference of the parameters under the generalized power Lindley distribution based on the hybrid type-II censoring scheme: a simulation study and application [Volume 14, Issue 2, 2024, Pages 177-198]
Monte Carlo simulation Estimation of reliability parameter for inverted exponential generalized distribution based on type 2 incremental censorship samples [Volume 10, Issue 1, 2020, Pages 60-74]
Multicomponent systems Improving the Quality of Design in Multicomponent Systems via Layout Optimization Towards Better Performance and Serviceability [Volume 10, Issue 4, 2020, Pages 299-312]
Multi-Component Systems A new Degradation analysis approach for multi-component systems based on functional relationships considering stochastic dependency [Volume 13, Issue 1, 2023, Pages 1-16]
Multi Criteria Decision Making (MCDM) Techniques Measuring the Efficiency of Lean Six Sigma (LSS) Projects in the Banking Industry Using the Hybrid Approach of Modified Balanced Scorecard (MBSC) and Multi Criteria Decision Making (MCDM) [Volume 9, Issue 4, 2019, Pages 346-358]
Multi-objective decision making Statistical-economic design of np control chart using multi-objective optimization and DEA with gray values [Volume 6, Issue 3, 2016, Pages 168-179]
Multi-Objective Optimization Correlated Multi-Objective Optimization: Application to the Separation of Perindopril [Volume 2, Issue 1, 2012, Pages 9-14]
Multi Objective Planning Multi-Objective Modeling of a Reverse Supply Chain by Robust in the Uncertainty of Demand Conditions Using a Meta-Heuristic Algorithm (NSGA-II) in Steel Industry [Volume 8, Issue 4, 2018, Pages 242-258]
Multi-Objective Planning Provide an integrated mathematical planning model for selecting and allocating orders for biomass power plant green suppliers [Volume 7, Issue 1, 2017, Pages 1-15]
Multi-Objective Planning Optimizing the program of preventive maintenance of the series-parallel system: A case study of the water supply system of power plants [Volume 11, Issue 1, 2021, Pages 45-60]
Multi-objective Weed optimization Algorithm Multi-Objective Green Agile Closed Loop Supply Chain Network Design Using Multi-objective Weed Optimization Algorithm [Volume 9, Issue 4, 2019, Pages 305-319]
Multiple Component Selection Reliability Optimization of Series-Parallel Systems in the Redundant Component Allocation Problem [Volume 1, Issue 1, 2011, Pages 21-27]
Multiple linear profiles Development of a piecemeal regression-based approach for monitoring multiple linear profiles with phase interactions [Volume 6, Issue 4, 2016, Pages 237-249]
Multiple linear profiles Step Change Point Estimation in the Mean of Multiple Linear Profiles by Probabilistic Neural Network [Volume 10, Issue 1, 2020, Pages 34-48]
Multiple sampling Design of mean control and standard deviation diagrams by multiple sampling [Volume 7, Issue 1, 2017, Pages 60-68]
Multi-Stage Processes Performance Evaluation of Simple Linear Profile Monitoring Methods in Two-Stage Processes [Volume 1, Issue 1, 2011, Pages 1-13]
Multi-Stage Sampling Optimization of Control Charts with Multi-Stage Sampling Using Genetic Algorithm [Volume 8, Issue 3, 2018, Pages 214-223]
Multi-stage surgeries Provide a method for monitoring the quality of two-stage thyroid cancer surgery using a logistic risk adjustment model [Volume 6, Issue 2, 2016, Pages 92-102]
Multi-state systems Multi-objective problem optimization of redundancy allocation and reliability in series-parallel multi-state systems [Volume 7, Issue 3, 2017, Pages 176-185]
Multi-state systems Extended Block Diagram Method for Evaluating the Reliability of Multi-State System with Dependent Components [Volume 8, Issue 2, 2018, Pages 75-85]
Multi-state systems Multi-state series–parallel system optimization using the genetic algorithm [Volume 5, Issue 1, 2015, Pages 13-22]
Multi-step process Development of cumulative sum control controls and dual rhythm moving moving averages based on generalized linear regression to monitor cascading processes [Volume 7, Issue 2, 2017, Pages 82-93]
Multivariate control chart A Spatiotemporal Model for Monitoring and Analysis of Product Color, Case Study: Dairy Products [Volume 9, Issue 2, 2019, Pages 138-153]
Multivariate function approximation A novel approach to nonparametric estimation of the intensity function of spatial Poisson point processes and its application in estimating the Intensity of Inga Sapindoides trees [Volume 13, Issue 3, 2023, Pages 317-334]
Multivariate normal process Estimation of the point of change in the multivariate normal process covariance matrix using neural networks [Volume 6, Issue 1, 2016, Pages 21-34]
Multivariate process statistical control Development of multivariate variance-covariance matrix monitoring methods in phase [Volume 4, Issue 1, 2014, Pages 14-22]
Multivariate Singular Spectrum Analysis (MSSA) Improving The Quality of Time Series Modeling and Forecasting Using Robust Multivariate Singular Spectrum Analysis [Volume 12, Issue 4, 2022, Pages 495-520]
Multivariate variance-covariance matrix monitoring Development of multivariate variance-covariance matrix monitoring methods in phase [Volume 4, Issue 1, 2014, Pages 14-22]

N

N} Optimization for enhancing the quality of the queueing model family {M/E_r/1,r∈N} based on the cost function, probability of system stationary, and customer satisfaction under a finite time horizon [Volume 15, Issue 3, 2025, Pages 271-280]
Namana Time Series Sturdy Control Charts for Time Series Data [Volume 10, Issue 4, 2020, Pages 269-278]
National Iranian Drilling Modeling and Analysis of the Privatization’s Effect on Corporate Performance Using the System Dynamics Approach and EFQM Excellence Model (Case Study: National Iranian Drilling Company) [Volume 9, Issue 3, 2019, Pages 271-283]
Network analysis process Improving product quality by combining fuzzy quality house and ideal planning of Bushehr Polymer Industrial Group [Volume 7, Issue 3, 2017, Pages 186-199]
Network Data Envelopment Analysis A Network DEA Approach to Assess Supply Chains and its Application in Medical Industry [Volume 8, Issue 1, 2018, Pages 37-48]
Neural Network Estimation of the point of change in the multivariate normal process covariance matrix using neural networks [Volume 6, Issue 1, 2016, Pages 21-34]
Neural Network Detection of bearing defects of industrial machines through audiometry using neural network [Volume 6, Issue 4, 2016, Pages 274-285]
Neural Network Developing a Mathematical Model to Determine the Optimum Buffer Size and Redundancy Allocation in Series-Parallel Production Systems [Volume 9, Issue 2, 2019, Pages 101-123]
Neural Network Fuzzy logic and artificial neural network hybrid modeling to predict machine failure in order to increase productivity [Volume 12, Issue 1, 2022, Pages 69-86]
Neural Network Evaluating the capability of artificial intelligence in predicting the amount of electrical conductivity and nitrate in underground water resources (a case study of artificial neural methods ANN and ANFIS) [Volume 13, Issue 2, 2023, Pages 207-230]
Neural Network Determining the Factors Influencing the Prediction of Helicopter Rotor Failures [(Articles in Press)]
New generalized two-parameter Weibull distribution Statistical-economic design of X ̅ control chart under the newly generalized two-parameter Weibull shock model [Volume 7, Issue 2, 2017, Pages 129-139]
New Technologies Presenting a model for the co-creation of value in startups based on new technologies [Volume 15, Issue 2, 2025, Pages 204-230]
Non-compliant items The effect of random percentage of defective items on product reliability [Volume 7, Issue 4, 2017, Pages 246-270]
Non- functional requirement How to choice the effective conceptual design on basis of functional and non-functional requirement in conceptual design stage for a submarine of class H [Volume 8, Issue 3, 2018, Pages 169-181]
Non-functional requirements Viability Assessment Model of Complex Engineering Systems in Uncertainty - A Case Study of a Satellite [Volume 7, Issue 3, 2017, Pages 208-222]
Non-Normal Data Comparison of Adaptive Control Charts for Non-Normal Data Using Simulation [Volume 1, Issue 1, 2011, Pages 45-55]
Non-Normal Distribution Optimal Design of a Sign Control Chart with Variable Sample Size [Volume 2, Issue 2, 2012, Pages 97-104]
Non parametric Control Chart Developing the Sign and Signed Rank Non-parametric Control Charts by Using Interval Type-2 Fuzzy Sets [Volume 12, Issue 3, 2022, Pages 251-272]
Nonparametric Control Chart Investigation of the effect of inertia on the performance of nonparametric signals of cumulative sum and rhythmic moving average [Volume 6, Issue 1, 2016, Pages 45-56]
Nonparametric Control Chart A Nonparametric GWMA Control Chart under Ranked Set Sampling for Monitoring Process Location Parameter [Volume 12, Issue 4, 2022, Pages 385-412]
Nonparametric Control Chart Title Economic-Statistical Design of Nonparametric GWMA Control Chart for Monitoring Location Parameter [Volume 13, Issue 2, 2023, Pages 111-130]
Nonparametric Control Chart Investigating the effect of measurement error on the performance of the signal control chart [Volume 4, Issue 1, 2014, Pages 23-32]
Non-repairable parts and repairable parts Provide an efficient model to increase the accessibility of systems with repairable and non-repairable parts as a multi-objective problem of allocating surplus components [Volume 6, Issue 3, 2016, Pages 191-203]
Non-uniform sampling distance Stattistical Design of X ̅ Control Chart With Variable Sample Size Under Weibull Shock Model With Non-Uniform Sampling Intervals [Volume 11, Issue 3, 2021, Pages 221-241]

O

Oil analysis Proposing a framework for reliability estimation using a proportional hazards model based on diesel engine condition monitoring data [Volume 14, Issue 1, 2024, Pages 1-17]
Operational and disruption risks Modeling COVID-19 Vaccine Cold Supply Chain Under Operational and Disruption Risks: A Multi-Criteria Simulation-Optimization Approach [(Articles in Press)]
Operational condition assessment of diesel engines Proposing a framework for reliability estimation using a proportional hazards model based on diesel engine condition monitoring data [Volume 14, Issue 1, 2024, Pages 1-17]
Operational processes Presenting a model for the optimal allocation of human resources to operational processes using the Markowitz model: A case study in urology unit at a kidney center [Volume 11, Issue 1, 2021, Pages 77-87]
Opportunities cost Provide a method to calculate the hidden costs and quality opportunities with the approach of harm to the goodwill of customers and the brand of the organization [Volume 11, Issue 1, 2021, Pages 1-14]
Optics Inspired Optimization (OIO) ‎ Making optimal decisions of quality level, warranty period and ‎advertising in a two-level supply chain [Volume 12, Issue 2, 2022, Pages 221-250]
Optimal censoring scheme Determining optimal scheme in type I Hybrid censoring from Burr type XII distribution based on cost function [Volume 11, Issue 2, 2021, Pages 191-202]
Optimal inspection times The parameter estimation methods for the exponential distribution under interval censored data; A comparison study [Volume 13, Issue 2, 2023, Pages 165-180]
Optimal number of servers Improving the Quality of M/M/m/K Queueing Systems Using System Cost Function Optimization [Volume 13, Issue 3, 2023, Pages 267-280]
Optimal Redundancy Allocation Problem A Multi-Objective Optimization Model for Fuzzy Reliability and Its Solution Using the Simulated Annealing Algorithm [Volume 2, Issue 3, 2012, Pages 123-131]
Optimal system Improving the Quality of M/M/m/K Queueing Systems Using System Cost Function Optimization [Volume 13, Issue 3, 2023, Pages 267-280]
Optimization of the dye adsorption process Optimization of the process of removal of acidic blue dye -74 from textile wastewater with modified nanozeolite [Volume 11, Issue 2, 2021, Pages 155-176]
Optimization problem Design of mean control and standard deviation diagrams by multiple sampling [Volume 7, Issue 1, 2017, Pages 60-68]
Optimization via Simulation Optimization of Redundancy Allocation Problem with Non-exponential Repairable Components Using Simulation Method and Artificial Neural Networks [Volume 9, Issue 3, 2019, Pages 226-243]
Ordinary Kriging Evaluating the capability of artificial intelligence in predicting the amount of electrical conductivity and nitrate in underground water resources (a case study of artificial neural methods ANN and ANFIS) [Volume 13, Issue 2, 2023, Pages 207-230]
Organizational agile management, information literacy, lifelong learning, quality improvement, ACRL standard Improving Service Quality Using a Structural Model of the Impact of Information Literacy on Agile Management: A Case Study of the Cultural and Artistic Organization of Tehran Municipality [Volume 5, Issue 1, 2015, Pages 64-73]
Organizational culture optimization Investigating the impact of productivity quality management indicators on increasing service production efficiency considering the importance of artificial intelligence in Pasargad insurance [Volume 15, Issue 4, 2025, Pages 398-414]
Outlier Data Estimating the parameters of two-parameter exponential distribution under random censoring with the presence of outlier data and determining the warranty period related to product quality. [Volume 12, Issue 1, 2022, Pages 15-38]
Outliers Improving The Quality of Time Series Modeling and Forecasting Using Robust Multivariate Singular Spectrum Analysis [Volume 12, Issue 4, 2022, Pages 495-520]
Out-of-Control Parameter Detection Detection of Out-of-Control Parameters in Polynomial Profiles Using an Artificial Neural Network [Volume 2, Issue 1, 2012, Pages 21-26]
Output Data Sturdy Control Charts for Time Series Data [Volume 10, Issue 4, 2020, Pages 269-278]

P

Parametric Control Charts Nonparametric control charts based on runs and Wilcoxon-type rank-sum statistics [Volume 12, Issue 3, 2022, Pages 273-298]
Pareto boundary Multi-Objective Green Agile Closed Loop Supply Chain Network Design Using Multi-objective Weed Optimization Algorithm [Volume 9, Issue 4, 2019, Pages 305-319]
Pareto distribution Double Objective Economic - Statistical Design under Pareto Shock models [Volume 12, Issue 1, 2022, Pages 87-102]
Partially accelerated life test Bayesian Prediction for Censored Data from the Kumaraswamy Distribution based on Constant-Stress Accelerated Life Test Model and Its Application in Ceramic Materials [Volume 11, Issue 1, 2021, Pages 15-32]
Pasargad Bank Identification and Ranking of Quality Dimensions in Service Organizations: A Case Study of Pasargad Bank [Volume 2, Issue 3, 2012, Pages 153-161]
Penalized likelihood Bayesian Shirinkage Variable Selection with Non-Local Priors in Ultrahigh-Dimensional Logistic Generalized Linear Models [Volume 12, Issue 2, 2022, Pages 103-124]
Performance Evaluation Investigating the relationship between productivity factors and performance of organizations by considering environmental indicators based on ISO 14001 standard [Volume 7, Issue 2, 2017, Pages 140-158]
Performance Evaluation Designing a Service Supply Chain Performance Evaluation Model Using Neural-Fuzzy Networks to Increase Service Quality and Productivity (Case Study: Home Appliance Companies in Iran) [Volume 8, Issue 3, 2018, Pages 182-202]
Performance Evaluation Evaluating the Efficiency of petrochemical companies based on human resource, operations and sales functions using Data Envelopment Analysis (DEA) approach [Volume 10, Issue 3, 2020, Pages 259-267]
Performance Management Designing a conceptual model for evaluating the excellence of work units in organizations [Volume 7, Issue 2, 2017, Pages 114-128]
Performance paper Reliability enhancing in hospital pharmaceutical supply chains using a blockchain-based system dynamics approach [Volume 15, Issue 4, 2025, Pages 468-488]
Perindopril Correlated Multi-Objective Optimization: Application to the Separation of Perindopril [Volume 2, Issue 1, 2012, Pages 9-14]
Permasyn engine Evaluation and modeling of Permasin engine reliability with the aim of improving its performance [Volume 13, Issue 1, 2023, Pages 43-58]
Petrochemical Industries Evaluating the Efficiency of petrochemical companies based on human resource, operations and sales functions using Data Envelopment Analysis (DEA) approach [Volume 10, Issue 3, 2020, Pages 259-267]
Pharmaceutical Services The use of quality benchmarking deployment to achieve world-class performance in pharmaceutical services for rare diseases [Volume 15, Issue 3, 2025, Pages 258-270]
Phased array antenna system Designing a product platform architecture development model with a multi-objective approach including DFC, DFV and DFSC, Case study: Phased array antenna system [Volume 12, Issue 2, 2022, Pages 171-198]
Phase I Monitoring Auto-Correlated Multivariate Simple Linear Profiles in Phase I under AR(1) and MA(1) Models [Volume 8, Issue 1, 2018, Pages 1-7]
Phase II A change point estimation approach for fuzzy logistic regression profiles in Phase II [Volume 11, Issue 3, 2021, Pages 307-322]
Phase II. Developing EWMAR Control Chart with Run Rules for Profile Monitoring [Volume 10, Issue 4, 2020, Pages 279-298]
Physical Asset Management Evaluate the performance of an advanced maintenance management system with a physical asset management approach [Volume 7, Issue 2, 2017, Pages 94-105]
Pit-shaped Statistical-economic design of X ̅ control chart under the newly generalized two-parameter Weibull shock model [Volume 7, Issue 2, 2017, Pages 129-139]
Pixel counts A novel approach to nonparametric estimation of the intensity function of spatial Poisson point processes and its application in estimating the Intensity of Inga Sapindoides trees [Volume 13, Issue 3, 2023, Pages 317-334]
PLS-SEM Hybrid PLSANN modeling to investigate the mediating role of Industry 4.0 technologies and customer satisfaction in the relationship between quality management practices and organizational performance [Volume 15, Issue 4, 2025, Pages 339-368]
Poisson Regression Profile Detection of Change Points in Poisson Regression Profiles with a Linear Trend [Volume 1, Issue 1, 2011, Pages 39-44]
Polar Matrix Integrating Value Analysis Based on Supply Chain Flexibility by Interpretive Ranking Process (IRP) (Case Study: Petrochemical Industry) [Volume 10, Issue 3, 2020, Pages 235-258]
Polynomial Profile Detection of Out-of-Control Parameters in Polynomial Profiles Using an Artificial Neural Network [Volume 2, Issue 1, 2012, Pages 21-26]
Portfolio generating functions Regression analysis of low beta anomaly in a stochastic portfolio with real market data [Volume 15, Issue 3, 2025, Pages 247-257]
Power Criterion Monitoring Auto-Correlated Multivariate Simple Linear Profiles in Phase I under AR(1) and MA(1) Models [Volume 8, Issue 1, 2018, Pages 1-7]
Power law process Reliability of degrading load sharing k-out-of-n:F system [Volume 11, Issue 2, 2021, Pages 177-190]
Predictive Maintenance Coupling failure analysis using condition monitoring data with machine learning approach [Volume 13, Issue 4, 2023, Pages 425-437]
Preventive facility location Modeling and Solving the Stochastic Problem of Maximum Coverage of Multi-Preventive Facilities with Meta-Heuristic Algorithms [Volume 9, Issue 2, 2019, Pages 154-171]
Pricing, return policy, product quality, competition, cooperation Pricing in a closed-loop supply chain considering product quality and return policies [Volume 5, Issue 1, 2015, Pages 23-38]
Principal component analysis Provide an integrated mathematical planning model for selecting and allocating orders for biomass power plant green suppliers [Volume 7, Issue 1, 2017, Pages 1-15]
Principal component analysis Presenting a proposed model to identify and reduce the dimensions of variables affecting the quality of slabs with a multi-variable-multi-stage approach (Case study: Isfahan Mobarakeh steel company) [Volume 14, Issue 2, 2024, Pages 91-104]
Printing and Publishing Industry Analysis of the demand forecasting process through the supply chain and comparison of the current and desired states in the book publishing [Volume 15, Issue 3, 2025, Pages 304-315]
Prioritization Prioritizing factors affecting the quality of managerial decision-making [Volume 15, Issue 1, 2025, Pages 1-19]
Prioritizing critical success factors Prioritizing the Critical Success Factors of Supply Chain Quality Management Based on Weighting Indicators Using Analytical Hierarchy Process: A Case Study in Golbaft Bag Manufacturing Company) [Volume 9, Issue 1, 2019, Pages 11-26]
Private Banks Optimal loan allocation model with emphasis on reducing non-performing loans in private banks [Volume 14, Issue 4, 2024, Pages 407-422]
Privatization Modeling and Analysis of the Privatization’s Effect on Corporate Performance Using the System Dynamics Approach and EFQM Excellence Model (Case Study: National Iranian Drilling Company) [Volume 9, Issue 3, 2019, Pages 271-283]
Probability of occurring Type I and type II errors Replacing the sequence probability ratio test with the V mask in the cumulative summative control chart [Volume 6, Issue 1, 2016, Pages 35-44]
Process capability index Developing a New Optimization Model Based on the Process Yield Index and the Process Capability Index for Resubmitted lots [Volume 9, Issue 4, 2019, Pages 334-345]
Process Failure Mechanism Combining Taguchi loss function and economic design of X ̅ control diagrams in the presence of normal and abnormal data [Volume 6, Issue 1, 2016, Pages 1-8]
Process Identification Diagnosis and Improvement Strategies for the Issuance Processes of Credit Guarantee Insurance Policies in Tose’e Ta’avon Using a Combination of TOPSIS, Shannon Entropy, and the Nominal Group Technique [(Articles in Press)]
Process incapability indices Developing a new functional capability index C_p^''' (Profile) for a simple linear profile with asymmetric tolerance [Volume 12, Issue 3, 2022, Pages 357-384]
Process modeling Diagnosis and Improvement Strategies for the Issuance Processes of Credit Guarantee Insurance Policies in Tose’e Ta’avon Using a Combination of TOPSIS, Shannon Entropy, and the Nominal Group Technique [(Articles in Press)]
Process Optimization Mathematical modeling of resource allocation in critical conditions with the aim of increasing the level of resilience of operational processes: the case study of the textile industry [Volume 11, Issue 4, 2021, Pages 393-412]
Process resilience Mathematical modeling of resource allocation in critical conditions with the aim of increasing the level of resilience of operational processes: the case study of the textile industry [Volume 11, Issue 4, 2021, Pages 393-412]
Process standard deviation The estimation of process standard deviation in statistical quality control: A review and comparison of methods [Volume 15, Issue 4, 2025, Pages 433-467]
Product Features Developing an integration model toward technological readiness, requirement statement document, and product features in macro-system design management: air- base products [Volume 13, Issue 1, 2023, Pages 73-94]
Production Planning Presenting a multivariate model of the effect of maintenance and repairs on production quality in pharmaceutical industry processes using the Bayesian approach [Volume 13, Issue 4, 2023, Pages 335-354]
Productivity Investigating the relationship between productivity factors and performance of organizations by considering environmental indicators based on ISO 14001 standard [Volume 7, Issue 2, 2017, Pages 140-158]
Productivity Using financial statements to calculate the productivity of a method company and compare it with industry [Volume 8, Issue 2, 2018, Pages 152-168]
Productivity Developing Emergency organization resources Management Productivity to Increase the Welfare of Stroke and heart attack patients Using Statistical and Spatial Statistics Analysis in Tehran [Volume 10, Issue 2, 2020, Pages 145-158]
Productivity Fuzzy logic and artificial neural network hybrid modeling to predict machine failure in order to increase productivity [Volume 12, Issue 1, 2022, Pages 69-86]
Productivity Productivity improvement through kaizen approach in home ‎appliance industry [Volume 13, Issue 2, 2023, Pages 131-146]
Productivity Modeling the automotive industry with the approach of increasing and improving productivity in Iran's non-oil exports using a dynamic system [Volume 14, Issue 1, 2024, Pages 18-30]
Product Platform Designing a product platform architecture development model with a multi-objective approach including DFC, DFV and DFSC, Case study: Phased array antenna system [Volume 12, Issue 2, 2022, Pages 171-198]
PROFILE A change point estimation approach for fuzzy logistic regression profiles in Phase II [Volume 11, Issue 3, 2021, Pages 307-322]
PROFILE Development of a Time-Based Segmentation Method for Phase I Profile Monitoring [Volume 1, Issue 1, 2011, Pages 28-38]
Profiles monitoring Step Change Point Estimation in the Mean of Multiple Linear Profiles by Probabilistic Neural Network [Volume 10, Issue 1, 2020, Pages 34-48]
Project monitoring Functionality of T2 and MEWMA multivariable control charts in project monitoring [Volume 13, Issue 3, 2023, Pages 253-266]
Proportional hazard regression model Monitoring Zero-inflated Poisson Processes based on Model-based Cumulative Sum(CUSUM) [Volume 12, Issue 4, 2022, Pages 439-460]
Pro-Rata Warranty Designing a Model for Estimating the Cost of Pro-Rata Warranty with limitation of Each Failure Rectification Cost under Inflationary Conditions [Volume 9, Issue 1, 2019, Pages 72-79]
Pseudo- likelihood function The parameter estimation methods for the exponential distribution under interval censored data; A comparison study [Volume 13, Issue 2, 2023, Pages 165-180]

Q

Quality Simulation of transportation costs Supply chain network design taking into account price and quality dependent demand [Volume 6, Issue 1, 2016, Pages 57-65]
Quality Ranking of selected hospitals in Iran in terms of service quality with a combination of SERVQUAL methods and data envelopment analysis [Volume 6, Issue 3, 2016, Pages 180-190]
Quality The effect of random percentage of defective items on product reliability [Volume 7, Issue 4, 2017, Pages 246-270]
Quality Improving the quality and safety of a marine system using the requirements management process [Volume 13, Issue 1, 2023, Pages 59-72]
Quality Developing compatibility model of Iran’s handmade carpet industry emphasizing quality and innovation factors [Volume 13, Issue 4, 2023, Pages 395-408]
Quality The optimization of process target means in different markets [Volume 14, Issue 1, 2024, Pages 68-78]
Quality Analysis and calculation of Iran's composite quality index using the Shannon entropy approach [Volume 14, Issue 2, 2024, Pages 145-161]
Quality A multi-objective mathematical model for designing the fruit supply chain based on the quality and sustainable development goals [Volume 15, Issue 2, 2025, Pages 180-203]
Quality Analysis of key factors of customer satisfaction with airline service quality and airline ratings: A combined VIKOR-DEMATEL approach [Volume 15, Issue 3, 2025, Pages 316-338]
Quality. Designing a Closed Loop Supply Chain Network Considering the Uncertainty in the Quality of Returning Products and solving it with Lp-Shape Scenario Reduction Algorithm [Volume 8, Issue 4, 2018, Pages 292-309]
Quality 4.0 Designing the establishment and implementation model of quality 4.0 with the integrated approach of interpretive structural modeling and structural equation modeling [Volume 12, Issue 1, 2022, Pages 51-68]
Quality 4.0 An analysis of the barriers to the implementation of quality 4.0 utilizing the approach fuzzy DANP [Volume 14, Issue 4, 2024, Pages 304-320]
Quality Benchmarking Deployment The use of quality benchmarking deployment to achieve world-class performance in pharmaceutical services for rare diseases [Volume 15, Issue 3, 2025, Pages 258-270]
Quality characteristic Design of mean control and standard deviation diagrams by multiple sampling [Volume 7, Issue 1, 2017, Pages 60-68]
Quality characteristic Optimization of Control Charts with Multi-Stage Sampling Using Genetic Algorithm [Volume 8, Issue 3, 2018, Pages 214-223]
Quality characteristic Economic statistical design of control chart for individual observations of exponential distribution [Volume 10, Issue 2, 2020, Pages 135-144]
Quality Characteristic Distribution Combining Taguchi loss function and economic design of X ̅ control diagrams in the presence of normal and abnormal data [Volume 6, Issue 1, 2016, Pages 1-8]
Quality Control Detection of bearing defects of industrial machines through audiometry using neural network [Volume 6, Issue 4, 2016, Pages 274-285]
Quality Control Ranking the Criteria of Quality Management System Implementation in Construction Quality Control Companies via Fuzzy Analytical Hierarchy Process [Volume 8, Issue 1, 2018, Pages 49-62]
Quality Control Economic-Statistical Design of Control Charts for monitoring the Process Mean with Known Standard Deviation Based on Bayesian Predictive Distribution [Volume 9, Issue 4, 2019, Pages 284-294]
Quality Control Designing a predictive model for evaluating foundry silica sands using data mining and designing experiments (Study of group 50 sands) [Volume 13, Issue 3, 2023, Pages 281-299]
Quality Control Presenting a multivariate model of the effect of maintenance and repairs on production quality in pharmaceutical industry processes using the Bayesian approach [Volume 13, Issue 4, 2023, Pages 335-354]
Quality Control A Review of the Application of Statistical Process Control Methods in the Design and Production Processes of Software Products [Volume 2, Issue 1, 2012, Pages 37-49]
Quality Control Self-assessment of product quality dimensions based on the network auxiliary variable-based size model [Volume 4, Issue 1, 2014, Pages 51-63]
Quality engineering Determining the contribution of uncorrelated components of product quality variability using a nonlinear functional function for the components [Volume 4, Issue 1, 2014, Pages 1-13]
Quality engineering Modeling COVID-19 Vaccine Cold Supply Chain Under Operational and Disruption Risks: A Multi-Criteria Simulation-Optimization Approach [(Articles in Press)]
Quality Function Deployment Providing a Combined Approach to Fuzzy QFD and Mathematical Planning (Case Study: Life Insurance) [Volume 6, Issue 2, 2016, Pages 118-132]
Quality house Improving product quality by combining fuzzy quality house and ideal planning of Bushehr Polymer Industrial Group [Volume 7, Issue 3, 2017, Pages 186-199]
Quality management Investigating the moderating role of environmental uncertainty in ISO 9001 relationships, product innovation and financial performance (Case study: Production organizations in Isfahan province) [Volume 7, Issue 3, 2017, Pages 223-245]
Quality management Ranking the Criteria of Quality Management System Implementation in Construction Quality Control Companies via Fuzzy Analytical Hierarchy Process [Volume 8, Issue 1, 2018, Pages 49-62]
Quality management Proposing an Integrated Approach for Total Quality Management Using Soft System Methodology – The Case of a Food Industrial Company [Volume 8, Issue 2, 2018, Pages 116-132]
Quality management Investigating the Receiving of ISO 9001 Certification on the Value of Participating in the Life Cycle [Volume 10, Issue 4, 2020, Pages 313-326]
Quality management Designing the establishment and implementation model of quality 4.0 with the integrated approach of interpretive structural modeling and structural equation modeling [Volume 12, Issue 1, 2022, Pages 51-68]
Quality management An analysis of the barriers to the implementation of quality 4.0 utilizing the approach fuzzy DANP [Volume 14, Issue 4, 2024, Pages 304-320]
Quality management Hybrid PLSANN modeling to investigate the mediating role of Industry 4.0 technologies and customer satisfaction in the relationship between quality management practices and organizational performance [Volume 15, Issue 4, 2025, Pages 339-368]
Quality Management of Supply Chain Designing an intelligent expert system for identification of sustainable supply chain multi capabilities [Volume 10, Issue 2, 2020, Pages 121-133]
Quality management practice An integrated FDM-FSWARA-FCOPRAS approach for choosing quality management practice in tile and ceramic SMEs in Iran [Volume 14, Issue 4, 2024, Pages 289-303]
Quality management system Analysis of quality management system using system dynamics [Volume 7, Issue 1, 2017, Pages 29-42]
Quality management system Providing a model of quality management system in FinTech startups [Volume 11, Issue 1, 2021, Pages 33-44]
Quality of design improvement Improving the Quality of Design in Multicomponent Systems via Layout Optimization Towards Better Performance and Serviceability [Volume 10, Issue 4, 2020, Pages 299-312]
Quality parameters Bayesian Shirinkage Variable Selection with Non-Local Priors in Ultrahigh-Dimensional Logistic Generalized Linear Models [Volume 12, Issue 2, 2022, Pages 103-124]
Quality requirements Provide a model to explain the relationship between quality requirements and service quality dimensions in Iranian universities [Volume 7, Issue 4, 2017, Pages 325-341]
Quality requirements The use of quality benchmarking deployment to achieve world-class performance in pharmaceutical services for rare diseases [Volume 15, Issue 3, 2025, Pages 258-270]
Quality Risk Management(QRM) Identification and Analysis of Product Quality Risks in pharmaceutical industry (Case study: Daana Pharmaceutical Co.) [Volume 11, Issue 3, 2021, Pages 261-284]
Quality self-assessment Self-assessment of product quality dimensions based on the network auxiliary variable-based size model [Volume 4, Issue 1, 2014, Pages 51-63]
Quantitative and qualitative predictor variable Identifying and prioritizing quantitative and qualitative variables predicting the success of investment projects in modeling perceptron neural network for quality management in free and special economic zones of the country [Volume 7, Issue 3, 2017, Pages 159-175]
Queuing Theory Modeling and Solving the Stochastic Problem of Maximum Coverage of Multi-Preventive Facilities with Meta-Heuristic Algorithms [Volume 9, Issue 2, 2019, Pages 154-171]

R

Random censoring Estimating the parameters of two-parameter exponential distribution under random censoring with the presence of outlier data and determining the warranty period related to product quality. [Volume 12, Issue 1, 2022, Pages 15-38]
Random Forest Algorithm Proposing a data-driven decision-making model for evaluating sustainable and resilient suppliers in the automotive industry [Volume 15, Issue 1, 2025, Pages 83-109]
Random Forest Algorithm A data-driven decision-making model for supplier selection in the LARG supply chain management with emphasis on the cultural dimension [Volume 15, Issue 2, 2025, Pages 148-179]
Ranked Set Sampling Economic-Statistical Design of ̅X Control Chart for Monitoring of Process Mean based on Ranked Set Sampling [Volume 8, Issue 3, 2018, Pages 224-233]
Ranked Set Sampling A Nonparametric GWMA Control Chart under Ranked Set Sampling for Monitoring Process Location Parameter [Volume 12, Issue 4, 2022, Pages 385-412]
Rare Diseases The use of quality benchmarking deployment to achieve world-class performance in pharmaceutical services for rare diseases [Volume 15, Issue 3, 2025, Pages 258-270]
Ratio of Mean Absolute Errors (RMAE) Improving The Quality of Time Series Modeling and Forecasting Using Robust Multivariate Singular Spectrum Analysis [Volume 12, Issue 4, 2022, Pages 495-520]
Ratio of Root Mean Square Errors (RRMSE) Improving The Quality of Time Series Modeling and Forecasting Using Robust Multivariate Singular Spectrum Analysis [Volume 12, Issue 4, 2022, Pages 495-520]
RBD Evaluation and modeling of Permasin engine reliability with the aim of improving its performance [Volume 13, Issue 1, 2023, Pages 43-58]
Realistic economic design A New Realistic Economic Designs of Sign Control Chart for Monitoring of Process Mean under Ranked Set Sampling in the Presence of multiple independent Assignable Causes [Volume 13, Issue 4, 2023, Pages 355-372]
Reconfigurable Manufacturing System [Volume 2, Issue 3, 2012, Pages 132-141]
Reducing Non-Performing Loans Optimal loan allocation model with emphasis on reducing non-performing loans in private banks [Volume 14, Issue 4, 2024, Pages 407-422]
Redundancy Design for Reliability: Case Study HRSG Boiler [Volume 10, Issue 3, 2020, Pages 189-202]
Redundancy allocation Developing a Mathematical Model to Determine the Optimum Buffer Size and Redundancy Allocation in Series-Parallel Production Systems [Volume 9, Issue 2, 2019, Pages 101-123]
Redundancy allocation Investigating the combined effect of redundancy allocation and stochastic dependency in condition-based maintenance model in series-parallel systems considering load sharing [Volume 14, Issue 1, 2024, Pages 46-67]
Redundant Components Reliability Optimization of Series-Parallel Systems in the Redundant Component Allocation Problem [Volume 1, Issue 1, 2011, Pages 21-27]
Reflected normal multivariate loss function Statistical-economic design of control charts RNLMVSIT2 [Volume 14, Issue 2, 2024, Pages 162-176]
Relative Efficiency The estimation of process standard deviation in statistical quality control: A review and comparison of methods [Volume 15, Issue 4, 2025, Pages 433-467]
Reliability Presenting a method based on PDS model and AHP technique for calculating and analyzing reliability considering the common cause failure for non-uniform components (Case study of the output of the dynamic position stabilization system of a vessel) [Volume 6, Issue 2, 2016, Pages 103-117]
Reliability Investment Alliance Defense Systems with Reliability Improvement Approach [Volume 6, Issue 3, 2016, Pages 146-157]
Reliability Provide an efficient model to increase the accessibility of systems with repairable and non-repairable parts as a multi-objective problem of allocating surplus components [Volume 6, Issue 3, 2016, Pages 191-203]
Reliability New combination of robust planning with credit constraints for responsive-dependent closed-loop supply chain network under uncertainty and disruptions [Volume 6, Issue 4, 2016, Pages 213-227]
Reliability Redundancy optimization by considering inventory and lost production cost [Volume 6, Issue 4, 2016, Pages 228-236]
Reliability Estimation of the remaining useful life of equipment with gradual deterioration with condition-based maintenance policy with the presence of two failure accelerators [Volume 6, Issue 4, 2016, Pages 260-273]
Reliability The effect of random percentage of defective items on product reliability [Volume 7, Issue 4, 2017, Pages 246-270]
Reliability Extended Block Diagram Method for Evaluating the Reliability of Multi-State System with Dependent Components [Volume 8, Issue 2, 2018, Pages 75-85]
Reliability Designing an Early Detection Model for Product Reliability Defects Using Warranty Data Analysis and Production Line Quality Test Results (Case study of engine room) [Volume 8, Issue 2, 2018, Pages 86-97]
Reliability Designing a Non-Linear Mixed Integer Two-objective Math Model to Maximize the Reliability of Blood Supply Chain [Volume 8, Issue 4, 2018, Pages 259-274]
Reliability Provide a Model for Estimating the Reliability of a Complex Submarine Based Stage System Using an Advanced Functional Block Diagram [Volume 8, Issue 4, 2018, Pages 275-291]
Reliability Reliability and Accessibility of Redundant Systems With the Markov Model Approach [Volume 10, Issue 1, 2020, Pages 75-85]
Reliability Sensitivity analysis and reliability assessment of integrated systems with dependent components in operation [Volume 10, Issue 1, 2020, Pages 49-59]
Reliability Design for Reliability: Case Study HRSG Boiler [Volume 10, Issue 3, 2020, Pages 189-202]
Reliability Optimizing Redundancy and Inventory of Spare Equipment with Regard to Reliability in Multi-State Systems [Volume 10, Issue 4, 2020, Pages 339-353]
Reliability Optimizing the program of preventive maintenance of the series-parallel system: A case study of the water supply system of power plants [Volume 11, Issue 1, 2021, Pages 45-60]
Reliability Reliability analysis and failure rate assessment (Case study: Heat Exchanger) [Volume 11, Issue 1, 2021, Pages 61-76]
Reliability Evaluate and control the factors affecting the equipment reliability with the approach Dynamic systems simulation, Case study: Ghaen Cement Factory) [Volume 11, Issue 2, 2021, Pages 89-106]
Reliability Estimating the availability of CNC milling machine using Markov chain [Volume 11, Issue 2, 2021, Pages 107-126]
Reliability The Effect of Common Cause Failure in Predicting the Reliability of the Railway Industry [Volume 12, Issue 2, 2022, Pages 125-151]
Reliability Design of control chart for reliability monitoring of systems subjected to cumulative shocks [Volume 11, Issue 4, 2021, Pages 323-338]
Reliability Design of a series-parallel system based on the problem of optimization of reliability and cost [Volume 12, Issue 1, 2022, Pages 39-50]
Reliability Optimizing and analyzing reliability through redundancy by meta-heuristic algorithms for a drone [Volume 12, Issue 3, 2022, Pages 299-318]
Reliability Evaluation and modeling of Permasin engine reliability with the aim of improving its performance [Volume 13, Issue 1, 2023, Pages 43-58]
Reliability Providing a mathematical model to measure reliability In the power distribution network [Volume 13, Issue 3, 2023, Pages 231-252]
Reliability Proposing a framework for reliability estimation using a proportional hazards model based on diesel engine condition monitoring data [Volume 14, Issue 1, 2024, Pages 1-17]
Reliability Investigating the combined effect of redundancy allocation and stochastic dependency in condition-based maintenance model in series-parallel systems considering load sharing [Volume 14, Issue 1, 2024, Pages 46-67]
Reliability Design of an integrated model combining ALT and ADT for lifetime estimation in the reliability analysis of a Turbine Engine Nozzle [Volume 15, Issue 1, 2025, Pages 50-66]
Reliability Reliability enhancing in hospital pharmaceutical supply chains using a blockchain-based system dynamics approach [Volume 15, Issue 4, 2025, Pages 468-488]
Reliability Fuzzy Reliability Modeling in an Aluminum Powder Production System [Volume 1, Issue 1, 2011, Pages 14-20]
Reliability Estimating the reliability of the rotor assembly mechanism in the F232G mechanical spindle using fuzzy Bayesian networks [Volume 4, Issue 1, 2014, Pages 43-50]
Reliability Allocation Developing a method for allocating reliability to subsystems of a cube satellite adopting suppliers readiness level approach. [Volume 10, Issue 2, 2020, Pages 103-119]
Reliability Allocation Allocating Reliability adopting Subsystem Resilience Approach taking up Foo Method [Volume 13, Issue 2, 2023, Pages 147-164]
Reliability-based maintenance Optimizing the program of preventive maintenance of the series-parallel system: A case study of the water supply system of power plants [Volume 11, Issue 1, 2021, Pages 45-60]
Reliability engineering Developing a method for allocating reliability to subsystems of a cube satellite adopting suppliers readiness level approach. [Volume 10, Issue 2, 2020, Pages 103-119]
Reliability methods Structural design of submarine pressure hull based on uncertainty and reliability methods [Volume 14, Issue 1, 2024, Pages 79-90]
Reliability Model. Study of Micro-Droplet Splashing in Coating Processes Using the Reliability Model Based on Censored Data [Volume 10, Issue 2, 2020, Pages 86-101]
Reliability model, Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS), reliability allocation, product life cycle, Interpretive Structural Modeling (ISM) Designing a Reliability Improvement Model Using the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) and Interpretive Structural Modeling (ISM) [Volume 5, Issue 1, 2015, Pages 49-63]
Reliability of mechanical systems A new method for modeling the reliability of mechanical systems with vanilla-shaped failure rates based on censored and accelerator tests [Volume 6, Issue 3, 2016, Pages 204-212]
Reliability Optimization Reliability Optimization of Series-Parallel Systems in the Redundant Component Allocation Problem [Volume 1, Issue 1, 2011, Pages 21-27]
Reliability parameter Bayesian Inference Parameter Reliability in Two-Parameter Riley Distribution under Increasingly Censored Bond Samples [Volume 10, Issue 2, 2020, Pages 159-168]
Reliability-redundancy Allocation Problem Optimizing reliability-redundancy problem with active and cold-standby strategy with triangular fuzzy number approach [Volume 13, Issue 1, 2023, Pages 17-42]
Remaining deviation Provide a method for monitoring the quality of two-stage thyroid cancer surgery using a logistic risk adjustment model [Volume 6, Issue 2, 2016, Pages 92-102]
Remaining deviation Development of cumulative sum control controls and dual rhythm moving moving averages based on generalized linear regression to monitor cascading processes [Volume 7, Issue 2, 2017, Pages 82-93]
Remaining useful life Estimation of the remaining useful life of equipment with gradual deterioration with condition-based maintenance policy with the presence of two failure accelerators [Volume 6, Issue 4, 2016, Pages 260-273]
Repair and Maintenance. Evaluate and control the factors affecting the equipment reliability with the approach Dynamic systems simulation, Case study: Ghaen Cement Factory) [Volume 11, Issue 2, 2021, Pages 89-106]
Research Information System Information Security Software Risk Analysis of Research Information Using Hybrid Approach of Fuzzy Failure Mode and Effect Analysis and Fuzzy Multi Criteria Decision Making [Volume 8, Issue 1, 2018, Pages 8-20]
Resilience Allocating Reliability adopting Subsystem Resilience Approach taking up Foo Method [Volume 13, Issue 2, 2023, Pages 147-164]
Resilience Strategy Closed loop supply chain network design under disturbance and uncertainty conditions considering quality and resilience strategy [Volume 6, Issue 2, 2016, Pages 133-145]
Resilient A multi-Objective Optimization Mathematical Model for Design and Planning of Sustainable Resilience Supply Chain under the Risk of Supply Disruption [Volume 9, Issue 3, 2019, Pages 212-225]
Resource Allocation Presenting a model for the optimal allocation of human resources to operational processes using the Markowitz model: A case study in urology unit at a kidney center [Volume 11, Issue 1, 2021, Pages 77-87]
Resource Allocation Mathematical modeling of resource allocation in critical conditions with the aim of increasing the level of resilience of operational processes: the case study of the textile industry [Volume 11, Issue 4, 2021, Pages 393-412]
Resource Allocation Development of a mathematical model for activity-based costing based on risk-based resource allocation [Volume 12, Issue 4, 2022, Pages 481-494]
Response Procedure Methodology A semi-parametric method for optimizing multi-response problems: A case study on improving the quality of plastic injection machines [Volume 7, Issue 1, 2017, Pages 16-28]
Response Surface Methodology Utilization of Response Surface Methodology and Goal Programming based on Simulation in a Robotic Cell to Optimize Sequencing [Volume 10, Issue 4, 2020, Pages 327-338]
Response surface methodology (RSM) Analysis of the effects of the main parameters of the geometric shape of the helicopter fuselage on the aerodynamic coefficients using Taguchi design and response procedure methodology [Volume 6, Issue 2, 2016, Pages 66-78]
RFM model Forecasting the Customer Lifetime Value by the Developed RFM Model: A Case Study in Insurance [Volume 8, Issue 4, 2018, Pages 327-336]
Rhythmic moving average squared deviation of the mean rhythmic mean Design of an adaptive control chart with variable sampling intervals using the maximum exponentially weighted moving average (EWMA) of squared deviations [Volume 5, Issue 1, 2015, Pages 1-12]
Risk and return Presenting a model for the optimal allocation of human resources to operational processes using the Markowitz model: A case study in urology unit at a kidney center [Volume 11, Issue 1, 2021, Pages 77-87]
Risk Based Inspection Reliability analysis and failure rate assessment (Case study: Heat Exchanger) [Volume 11, Issue 1, 2021, Pages 61-76]
Risk-based resource allocation Development of a mathematical model for activity-based costing based on risk-based resource allocation [Volume 12, Issue 4, 2022, Pages 481-494]
Risk management. Combination of Robust Optimization and Risk Management to Design Closed-Loop Green Supply Chain Network [Volume 9, Issue 2, 2019, Pages 186-201]
Risk management Assess and Address the Risks of Decision Making in the Conformity Assessment Arocess [Volume 9, Issue 4, 2019, Pages 320-333]
Risk Management Information Security Software Risk Analysis of Research Information Using Hybrid Approach of Fuzzy Failure Mode and Effect Analysis and Fuzzy Multi Criteria Decision Making [Volume 8, Issue 1, 2018, Pages 8-20]
Risk-Taking Analysis of heterogeneity and transmission mechanism of the effect of FinTech innovation on banks' risk-taking behavior (Models: DID, 2SLS-IV, GMM) [Volume 14, Issue 3, 2024, Pages 253-271]
Robotic manufacturing cell Utilization of Response Surface Methodology and Goal Programming based on Simulation in a Robotic Cell to Optimize Sequencing [Volume 10, Issue 4, 2020, Pages 327-338]
Robustification Improving The Quality of Time Series Modeling and Forecasting Using Robust Multivariate Singular Spectrum Analysis [Volume 12, Issue 4, 2022, Pages 495-520]
Robust Regression Identification of Defects in Power Distribution Panels Using Spatial Control Charts [Volume 2, Issue 2, 2012, Pages 89-96]
Rotor assembly Estimating the reliability of the rotor assembly mechanism in the F232G mechanical spindle using fuzzy Bayesian networks [Volume 4, Issue 1, 2014, Pages 43-50]
Routing Supply Chain Quality Management in Transportation Routing Using Genetic Algorithm [Volume 10, Issue 3, 2020, Pages 227-234]
Rubber industry Analyzing the quality of digitalization in supply chain collaboration models using an integrated fuzzy BWM-TOPSIS approach [Volume 14, Issue 3, 2024, Pages 224-243]
Run rules scheme Developing EWMAR Control Chart with Run Rules for Profile Monitoring [Volume 10, Issue 4, 2020, Pages 279-298]

S

Scada Implementation Condition Monitoring in Wind Turbines for Reducing Maintenance Cost with Using Scada Method [Volume 9, Issue 3, 2019, Pages 261-270]
Scale Size with Maximum Productivity A Network DEA Approach to Assess Supply Chains and its Application in Medical Industry [Volume 8, Issue 1, 2018, Pages 37-48]
Segmentation Development of a Time-Based Segmentation Method for Phase I Profile Monitoring [Volume 1, Issue 1, 2011, Pages 28-38]
Self-assessment process Identifying and categorizing the components of management commitment in implementing business excellence models [Volume 4, Issue 1, 2014, Pages 64-76]
Self-correlated data A neural-fuzzy adaptive inference system for statistical control of the process with self-correlated data [Volume 6, Issue 4, 2016, Pages 250-259]
Semi-parametric method A semi-parametric method for optimizing multi-response problems: A case study on improving the quality of plastic injection machines [Volume 7, Issue 1, 2017, Pages 16-28]
Sensitivity analysis Sensitivity analysis and reliability assessment of integrated systems with dependent components in operation [Volume 10, Issue 1, 2020, Pages 49-59]
Sequential probability ratio test Replacing the sequence probability ratio test with the V mask in the cumulative summative control chart [Volume 6, Issue 1, 2016, Pages 35-44]
Series-parallel system Design of a series-parallel system based on the problem of optimization of reliability and cost [Volume 12, Issue 1, 2022, Pages 39-50]
Series-parallel system Investigating the combined effect of redundancy allocation and stochastic dependency in condition-based maintenance model in series-parallel systems considering load sharing [Volume 14, Issue 1, 2024, Pages 46-67]
Service Improvement Investigating the impact of productivity quality management indicators on increasing service production efficiency considering the importance of artificial intelligence in Pasargad insurance [Volume 15, Issue 4, 2025, Pages 398-414]
Service level Designing an integrated green supply chain model with an emphasis on improving environmental quality and increasing customer satisfaction [Volume 15, Issue 1, 2025, Pages 31-49]
Service Level Agreement Service Contract-Aware Quality Supervisory Methodology in Cloud Systems [Volume 9, Issue 2, 2019, Pages 172-185]
Service Quality Identification and Ranking of Quality Dimensions in Service Organizations: A Case Study of Pasargad Bank [Volume 2, Issue 3, 2012, Pages 153-161]
Service Quality and Productivity. Designing a Service Supply Chain Performance Evaluation Model Using Neural-Fuzzy Networks to Increase Service Quality and Productivity (Case Study: Home Appliance Companies in Iran) [Volume 8, Issue 3, 2018, Pages 182-202]
Service Quality Supervisory Service Contract-Aware Quality Supervisory Methodology in Cloud Systems [Volume 9, Issue 2, 2019, Pages 172-185]
Service Supply Chain Designing a Service Supply Chain Performance Evaluation Model Using Neural-Fuzzy Networks to Increase Service Quality and Productivity (Case Study: Home Appliance Companies in Iran) [Volume 8, Issue 3, 2018, Pages 182-202]
Servqual Ranking of selected hospitals in Iran in terms of service quality with a combination of SERVQUAL methods and data envelopment analysis [Volume 6, Issue 3, 2016, Pages 180-190]
Shannon entropy approach Analysis and calculation of Iran's composite quality index using the Shannon entropy approach [Volume 14, Issue 2, 2024, Pages 145-161]
Shipping costs Determining the size of the production batch using MIP models [Volume 7, Issue 1, 2017, Pages 43-59]
Shock models Design of control chart for reliability monitoring of systems subjected to cumulative shocks [Volume 11, Issue 4, 2021, Pages 323-338]
Sign chart Investigating the effect of measurement error on the performance of the signal control chart [Volume 4, Issue 1, 2014, Pages 23-32]
Sign Control Chart Title Economic-Statistical Design of Nonparametric GWMA Control Chart for Monitoring Location Parameter [Volume 13, Issue 2, 2023, Pages 111-130]
Sign Control Chart A New Realistic Economic Designs of Sign Control Chart for Monitoring of Process Mean under Ranked Set Sampling in the Presence of multiple independent Assignable Causes [Volume 13, Issue 4, 2023, Pages 355-372]
Sign Control Chart Optimal Design of a Sign Control Chart with Variable Sample Size [Volume 2, Issue 2, 2012, Pages 97-104]
Silica Designing a predictive model for evaluating foundry silica sands using data mining and designing experiments (Study of group 50 sands) [Volume 13, Issue 3, 2023, Pages 281-299]
Simple linear profile Developing an Approach for Monitoring Simple Linear Profiles Parameters in Short Run Processes in Phase ΙΙ [Volume 10, Issue 1, 2020, Pages 16-33]
Simple linear profile Developing a new functional capability index C_p^''' (Profile) for a simple linear profile with asymmetric tolerance [Volume 12, Issue 3, 2022, Pages 357-384]
Simple linear profiles Developing EWMAR Control Chart with Run Rules for Profile Monitoring [Volume 10, Issue 4, 2020, Pages 279-298]
Simulated Annealing Algorithm A Multi-Objective Optimization Model for Fuzzy Reliability and Its Solution Using the Simulated Annealing Algorithm [Volume 2, Issue 3, 2012, Pages 123-131]
Simulation Developing a Mathematical Model to Determine the Optimum Buffer Size and Redundancy Allocation in Series-Parallel Production Systems [Volume 9, Issue 2, 2019, Pages 101-123]
Simulation Designing an intelligent expert system for identification of sustainable supply chain multi capabilities [Volume 10, Issue 2, 2020, Pages 121-133]
Simulation Utilization of Response Surface Methodology and Goal Programming based on Simulation in a Robotic Cell to Optimize Sequencing [Volume 10, Issue 4, 2020, Pages 327-338]
Simulation Integration of Six Sigma Methodology and Discrete-Event System Simulation for Quality Improvement and Reduction of Cold Material in the Smelting Plant of Sarcheshmeh Copper Complex [Volume 2, Issue 3, 2012, Pages 142-152]
Simulation-based optimization Introduce a New Simulation-Based Optimization Model to Integrate Decisions about Products under Warranty and Out of Warranty [Volume 8, Issue 4, 2018, Pages 310-326]
SIR algorithm Bayesian estimation of fractional Ornstein-Uhlenbeck model parameters using the sir algorithm in financial derivatives pricing [Volume 14, Issue 3, 2024, Pages 217-223]
Six Sigma Integration of Six Sigma Methodology and Discrete-Event System Simulation for Quality Improvement and Reduction of Cold Material in the Smelting Plant of Sarcheshmeh Copper Complex [Volume 2, Issue 3, 2012, Pages 142-152]
Six Sigma Determining the contribution of uncorrelated components of product quality variability using a nonlinear functional function for the components [Volume 4, Issue 1, 2014, Pages 1-13]
Smart parking Introducing a new method for locating moving objects using monopole antennas and scattering matrices in order to increase the quality of service in smart parking lots [Volume 7, Issue 4, 2017, Pages 271-286]
Smelting Process Integration of Six Sigma Methodology and Discrete-Event System Simulation for Quality Improvement and Reduction of Cold Material in the Smelting Plant of Sarcheshmeh Copper Complex [Volume 2, Issue 3, 2012, Pages 142-152]
Soft Factors Identification and Ranking of Key Success Factors of Total Quality Management with Fuzzy Dimtel Approach and Analysis of Fuzzy Networks (Case Study: Akhshan Manufacturing Company) [Volume 9, Issue 1, 2019, Pages 80-100]
Soft Operational Research Proposing an Integrated Approach for Total Quality Management Using Soft System Methodology – The Case of a Food Industrial Company [Volume 8, Issue 2, 2018, Pages 116-132]
Soft System Methodology Proposing an Integrated Approach for Total Quality Management Using Soft System Methodology – The Case of a Food Industrial Company [Volume 8, Issue 2, 2018, Pages 116-132]
Software Improvement A Review of the Application of Statistical Process Control Methods in the Design and Production Processes of Software Products [Volume 2, Issue 1, 2012, Pages 37-49]
Sophisticated engineering systems Viability Assessment Model of Complex Engineering Systems in Uncertainty - A Case Study of a Satellite [Volume 7, Issue 3, 2017, Pages 208-222]
Spare parts Optimizing Redundancy and Inventory of Spare Equipment with Regard to Reliability in Multi-State Systems [Volume 10, Issue 4, 2020, Pages 339-353]
Spare parts inventory Redundancy optimization by considering inventory and lost production cost [Volume 6, Issue 4, 2016, Pages 228-236]
Spatial Autocorrelation Developing Emergency organization resources Management Productivity to Increase the Welfare of Stroke and heart attack patients Using Statistical and Spatial Statistics Analysis in Tehran [Volume 10, Issue 2, 2020, Pages 145-158]
Spatial Control Chart Identification of Defects in Power Distribution Panels Using Spatial Control Charts [Volume 2, Issue 2, 2012, Pages 89-96]
Spline function, genetic algorithm, knot points, maximum likelihood estimation, least squares error Approximation of spline regression curves using the genetic algorithm [Volume 5, Issue 1, 2015, Pages 39-48]
Stability Sturdy Control Charts for Time Series Data [Volume 10, Issue 4, 2020, Pages 269-278]
Stable regression model A semi-parametric method for optimizing multi-response problems: A case study on improving the quality of plastic injection machines [Volume 7, Issue 1, 2017, Pages 16-28]
Stakeholder expectation Providing a comprehensive model to define the technical requirements of complex systems in design offices [Volume 13, Issue 4, 2023, Pages 409-424]
Startups Presenting a model for the co-creation of value in startups based on new technologies [Volume 15, Issue 2, 2025, Pages 204-230]
Stationary probability Optimization for enhancing the quality of the queueing model family {M/E_r/1,r∈N} based on the cost function, probability of system stationary, and customer satisfaction under a finite time horizon [Volume 15, Issue 3, 2025, Pages 271-280]
Statistical design Stattistical Design of X ̅ Control Chart With Variable Sample Size Under Weibull Shock Model With Non-Uniform Sampling Intervals [Volume 11, Issue 3, 2021, Pages 221-241]
Statistical design Statistical design of the percentile-based depth-based multivariate control chart [Volume 12, Issue 1, 2022, Pages 1-14]
Statistical-economic design Statistical-economic design of X ̅ control chart under the newly generalized two-parameter Weibull shock model [Volume 7, Issue 2, 2017, Pages 129-139]
Statistical-economic design Statistical-economic design of X ̅ control diagram for correlated data under generalized shock and Weibull models [Volume 7, Issue 3, 2017, Pages 200-207]
Statistical-economic design Integrating the Taguchi Loss Approach into the Economic Statistical Design of the X ̅ Control Chart Using an Asymmetric Loss Function [Volume 7, Issue 4, 2017, Pages 287-305]
Statistical-economic design Statistical-economic design of EWMA control chart for monitoring the process average under ranking set sampling [Volume 10, Issue 1, 2020, Pages 1-15]
Statistical-economic design Statistical-economic design of control charts RNLMVSIT2 [Volume 14, Issue 2, 2024, Pages 162-176]
Statistical process control A neural-fuzzy adaptive inference system for statistical control of the process with self-correlated data [Volume 6, Issue 4, 2016, Pages 250-259]
Statistical process control Investigating the effect of estimating ARCH model parameters on financial process control charts [Volume 7, Issue 2, 2017, Pages 106-113]
Statistical process control Optimization of Control Charts with Multi-Stage Sampling Using Genetic Algorithm [Volume 8, Issue 3, 2018, Pages 214-223]
Statistical process control Statistical design of the percentile-based depth-based multivariate control chart [Volume 12, Issue 1, 2022, Pages 1-14]
Statistical process control Detection of Change Points in Poisson Regression Profiles with a Linear Trend [Volume 1, Issue 1, 2011, Pages 39-44]
Statistical process control Monitoring Defective Rate of Autocorrelated Binary Data Under 100% Inspection Conditions [Volume 2, Issue 1, 2012, Pages 56-63]
Statistical process control A neuro-fuzzy adaptive inference system for statistical control of autocorrelated data processes [Volume 4, Issue 1, 2014, Pages 33-42]
Statistical process control Developing an Approach for Monitoring Simple Linear Profiles Parameters in Short Run Processes in Phase ΙΙ [Volume 10, Issue 1, 2020, Pages 16-33]
Statistical process control charts A Statistical Process Control Model for Monitoring Factors Affecting Unsafe Behaviors [Volume 2, Issue 3, 2012, Pages 116-122]
Statistical process control (SPC). Step Change Point Estimation in the Mean of Multiple Linear Profiles by Probabilistic Neural Network [Volume 10, Issue 1, 2020, Pages 34-48]
Statistical Process Control (SPC) Sturdy Control Charts for Time Series Data [Volume 10, Issue 4, 2020, Pages 269-278]
Statistical Process Control (SPC) Nonparametric control charts based on runs and Wilcoxon-type rank-sum statistics [Volume 12, Issue 3, 2022, Pages 273-298]
Statistical Process Control (SPC) Change-Point Estimation in the Mean of a Two-Attribute Attribute Process with a Binomial Distribution [Volume 2, Issue 1, 2012, Pages 15-20]
Statistical Process Control (SPC) Detection of Out-of-Control Parameters in Polynomial Profiles Using an Artificial Neural Network [Volume 2, Issue 1, 2012, Pages 21-26]
Statistical Process Control (SPC) A Review of the Application of Statistical Process Control Methods in the Design and Production Processes of Software Products [Volume 2, Issue 1, 2012, Pages 37-49]
Statistical Quality Control Design of mean control and standard deviation diagrams by multiple sampling [Volume 7, Issue 1, 2017, Pages 60-68]
Statistical Quality Control The estimation of process standard deviation in statistical quality control: A review and comparison of methods [Volume 15, Issue 4, 2025, Pages 433-467]
Steel Making Industry Multi-Objective Modeling of a Reverse Supply Chain by Robust in the Uncertainty of Demand Conditions Using a Meta-Heuristic Algorithm (NSGA-II) in Steel Industry [Volume 8, Issue 4, 2018, Pages 242-258]
Step change Estimation of the point of change in the multivariate normal process covariance matrix using neural networks [Volume 6, Issue 1, 2016, Pages 21-34]
Stochastic Dependency A new Degradation analysis approach for multi-component systems based on functional relationships considering stochastic dependency [Volume 13, Issue 1, 2023, Pages 1-16]
Stochastic Process Extended Block Diagram Method for Evaluating the Reliability of Multi-State System with Dependent Components [Volume 8, Issue 2, 2018, Pages 75-85]
Stroke Developing Emergency organization resources Management Productivity to Increase the Welfare of Stroke and heart attack patients Using Statistical and Spatial Statistics Analysis in Tehran [Volume 10, Issue 2, 2020, Pages 145-158]
Structural Equation Investigating the moderating role of environmental uncertainty in ISO 9001 relationships, product innovation and financial performance (Case study: Production organizations in Isfahan province) [Volume 7, Issue 3, 2017, Pages 223-245]
Success Identifying and prioritizing quantitative and qualitative variables predicting the success of investment projects in modeling perceptron neural network for quality management in free and special economic zones of the country [Volume 7, Issue 3, 2017, Pages 159-175]
Supervised Learning Target replacement , a new approach to increase the performance of fraud detection system in auto insurance utilizing supervising learning [Volume 11, Issue 4, 2021, Pages 413-428]
Supplier selection Proposing a data-driven decision-making model for evaluating sustainable and resilient suppliers in the automotive industry [Volume 15, Issue 1, 2025, Pages 83-109]
Supplier selection A data-driven decision-making model for supplier selection in the LARG supply chain management with emphasis on the cultural dimension [Volume 15, Issue 2, 2025, Pages 148-179]
Supply chain A Network DEA Approach to Assess Supply Chains and its Application in Medical Industry [Volume 8, Issue 1, 2018, Pages 37-48]
Supply chain Designing a Closed Loop Supply Chain Network Considering the Uncertainty in the Quality of Returning Products and solving it with Lp-Shape Scenario Reduction Algorithm [Volume 8, Issue 4, 2018, Pages 292-309]
Supply chain Designing an intelligent expert system for identification of sustainable supply chain multi capabilities [Volume 10, Issue 2, 2020, Pages 121-133]
Supply chain Analysis of the demand forecasting process through the supply chain and comparison of the current and desired states in the book publishing [Volume 15, Issue 3, 2025, Pages 304-315]
Supply Chain Flexibility Integrating Value Analysis Based on Supply Chain Flexibility by Interpretive Ranking Process (IRP) (Case Study: Petrochemical Industry) [Volume 10, Issue 3, 2020, Pages 235-258]
Supply chain management Modeling a sustainable and resilient supply chain in the automotive industry [Volume 14, Issue 4, 2024, Pages 379-406]
Supply chain management Designing an integrated green supply chain model with an emphasis on improving environmental quality and increasing customer satisfaction [Volume 15, Issue 1, 2025, Pages 31-49]
Supply chain management Optimization of a Closed-Loop Viable Supply Chain Network under Hybrid Uncertainty [(Articles in Press)]
Supply chain network New combination of robust planning with credit constraints for responsive-dependent closed-loop supply chain network under uncertainty and disruptions [Volume 6, Issue 4, 2016, Pages 213-227]
Supply chain network design Closed loop supply chain network design under disturbance and uncertainty conditions considering quality and resilience strategy [Volume 6, Issue 2, 2016, Pages 133-145]
Supply chain network design Simulation of transportation costs Supply chain network design taking into account price and quality dependent demand [Volume 6, Issue 1, 2016, Pages 57-65]
Supply chain network design Designing a Closed Loop Supply Chain Network Considering the Uncertainty in the Quality of Returning Products and solving it with Lp-Shape Scenario Reduction Algorithm [Volume 8, Issue 4, 2018, Pages 292-309]
Supply chain network design Designing a supply chain network for agricultural waste from the country's palm groves [Volume 14, Issue 1, 2024, Pages 31-45]
Supply Chain Quality Supply Chain Quality Management in Transportation Routing Using Genetic Algorithm [Volume 10, Issue 3, 2020, Pages 227-234]
Supply Chain Quality Analyzing the quality of digitalization in supply chain collaboration models using an integrated fuzzy BWM-TOPSIS approach [Volume 14, Issue 3, 2024, Pages 224-243]
Supply chain quality management Prioritizing the Critical Success Factors of Supply Chain Quality Management Based on Weighting Indicators Using Analytical Hierarchy Process: A Case Study in Golbaft Bag Manufacturing Company) [Volume 9, Issue 1, 2019, Pages 11-26]
Supply disruption A multi-Objective Optimization Mathematical Model for Design and Planning of Sustainable Resilience Supply Chain under the Risk of Supply Disruption [Volume 9, Issue 3, 2019, Pages 212-225]
Support Vector Machine Optimal stock portfolio quality management using the combination of the Markowitz model with support vector machine methods, data envelopment analysis, and DB scan [Volume 14, Issue 4, 2024, Pages 358-378]
Surface roughness Application of Design of Experiments and Grey Analysis to Optimize the Surface Roughness Quality of AISI 4340 Steel in Turning Using TiN Tools [Volume 2, Issue 2, 2012, Pages 71-77]
Surfactant tween-60 Optimization of the process of removal of acidic blue dye -74 from textile wastewater with modified nanozeolite [Volume 11, Issue 2, 2021, Pages 155-176]
Surplus allocation and reliability Multi-objective problem optimization of redundancy allocation and reliability in series-parallel multi-state systems [Volume 7, Issue 3, 2017, Pages 176-185]
Sustainability Modeling a sustainable and resilient supply chain in the automotive industry [Volume 14, Issue 4, 2024, Pages 379-406]
Sustainability Proposing a data-driven decision-making model for evaluating sustainable and resilient suppliers in the automotive industry [Volume 15, Issue 1, 2025, Pages 83-109]
Sustainable development goals A multi-objective mathematical model for designing the fruit supply chain based on the quality and sustainable development goals [Volume 15, Issue 2, 2025, Pages 180-203]
Sustainable Outsourcing Risk Interpretive Prioritization of Sustainable Outsourcing Risk Control Based on Capacity Supply Chain Capabilities Based on Analysis Interpretive Ranking Process (IRP) [Volume 10, Issue 3, 2020, Pages 203-226]
Sustainable Supply Chain Designing an intelligent expert system for identification of sustainable supply chain multi capabilities [Volume 10, Issue 2, 2020, Pages 121-133]
System Engineering Improving the quality and safety of a marine system using the requirements management process [Volume 13, Issue 1, 2023, Pages 59-72]
System Engineering Providing a comprehensive model to define the technical requirements of complex systems in design offices [Volume 13, Issue 4, 2023, Pages 409-424]
System failure Design of control chart for reliability monitoring of systems subjected to cumulative shocks [Volume 11, Issue 4, 2021, Pages 323-338]
Systems Analysis Analysis of quality management system using system dynamics [Volume 7, Issue 1, 2017, Pages 29-42]
Systems Engineering Developing a method for allocating reliability to subsystems of a cube satellite adopting suppliers readiness level approach. [Volume 10, Issue 2, 2020, Pages 103-119]

T

Taguchi design Analysis of the effects of the main parameters of the geometric shape of the helicopter fuselage on the aerodynamic coefficients using Taguchi design and response procedure methodology [Volume 6, Issue 2, 2016, Pages 66-78]
Taguchi loss approach Integrating the Taguchi Loss Approach into the Economic Statistical Design of the X ̅ Control Chart Using an Asymmetric Loss Function [Volume 7, Issue 4, 2017, Pages 287-305]
Taguchi loss function A generalized integrated model of incomplete maintenance strategies, early replacement and Taguchi loss function in the economic design of X ̅ control diagram for declining processes [Volume 6, Issue 3, 2016, Pages 158-167]
Taguchi loss function The optimization of process target means in different markets [Volume 14, Issue 1, 2024, Pages 68-78]
Taguchi quality loss function Providing an exact mathematical model for process planning and advanced scheduling with the aim of reducing quality costs [Volume 2, Issue 3, 2012, Pages 105-115]
Taguchi’s Loss Function Combining Taguchi loss function and economic design of X ̅ control diagrams in the presence of normal and abnormal data [Volume 6, Issue 1, 2016, Pages 1-8]
Technical Requirements Providing a comprehensive model to define the technical requirements of complex systems in design offices [Volume 13, Issue 4, 2023, Pages 409-424]
Technology. Design structure matrix Developing a method for allocating reliability to subsystems of a cube satellite adopting suppliers readiness level approach. [Volume 10, Issue 2, 2020, Pages 103-119]
Telecommunication system Providing a comprehensive model to define the technical requirements of complex systems in design offices [Volume 13, Issue 4, 2023, Pages 409-424]
The M/M/m/K queuing system Improving the Quality of M/M/m/K Queueing Systems Using System Cost Function Optimization [Volume 13, Issue 3, 2023, Pages 267-280]
Thyroglobulin (TG) Provide a method for monitoring the quality of two-stage thyroid cancer surgery using a logistic risk adjustment model [Volume 6, Issue 2, 2016, Pages 92-102]
Thyroid cancer Provide a method for monitoring the quality of two-stage thyroid cancer surgery using a logistic risk adjustment model [Volume 6, Issue 2, 2016, Pages 92-102]
Tile and ceramic Industry An integrated FDM-FSWARA-FCOPRAS approach for choosing quality management practice in tile and ceramic SMEs in Iran [Volume 14, Issue 4, 2024, Pages 289-303]
Time-Based Clustering Development of a Time-Based Segmentation Method for Phase I Profile Monitoring [Volume 1, Issue 1, 2011, Pages 28-38]
Time-Dependent Quality Indices Robust Design Optimization for Time-Based Quality Indices Using the Utility Function [Volume 2, Issue 2, 2012, Pages 78-88]
TOPSIS Method Introducing the new development approach of DEA and TOPSIS for performance rating (Case study of cement companies listed on the stock exchange) [Volume 7, Issue 1, 2017, Pages 69-81]
Total Quality Management Proposing an Integrated Approach for Total Quality Management Using Soft System Methodology – The Case of a Food Industrial Company [Volume 8, Issue 2, 2018, Pages 116-132]
Total Quality Management Prioritizing the Critical Success Factors of Supply Chain Quality Management Based on Weighting Indicators Using Analytical Hierarchy Process: A Case Study in Golbaft Bag Manufacturing Company) [Volume 9, Issue 1, 2019, Pages 11-26]
Total Quality Management Identification and Ranking of Key Success Factors of Total Quality Management with Fuzzy Dimtel Approach and Analysis of Fuzzy Networks (Case Study: Akhshan Manufacturing Company) [Volume 9, Issue 1, 2019, Pages 80-100]
Total Quality Management Total quality management and performance: Empirical evidence of the mediating role of management accountants and the management accounting system [Volume 15, Issue 2, 2025, Pages 231-246]
Traffic simulation Application of Design of Experiments to Investigate the Effects of Highway Traffic Control Strategies [Volume 2, Issue 1, 2012, Pages 27-36]
Traffic Smoothing Application of Design of Experiments to Investigate the Effects of Highway Traffic Control Strategies [Volume 2, Issue 1, 2012, Pages 27-36]
Training and Learning Identification and Ranking of Key Success Factors of Total Quality Management with Fuzzy Dimtel Approach and Analysis of Fuzzy Networks (Case Study: Akhshan Manufacturing Company) [Volume 9, Issue 1, 2019, Pages 80-100]
Transportation companies Prioritization of airline company insurance risks using the GFAHP method [Volume 13, Issue 3, 2023, Pages 299-316]
Trapezoidal Fuzzy Numbers. Title: Measurement System Analysis: A Fuzzy model for Tool Capability [Volume 8, Issue 3, 2018, Pages 203-213]
T² Statistical-economic design of control charts RNLMVSIT2 [Volume 14, Issue 2, 2024, Pages 162-176]
Tubing Analysis of quality management system using system dynamics [Volume 7, Issue 1, 2017, Pages 29-42]
Turbine Engine Nozzle Design of an integrated model combining ALT and ADT for lifetime estimation in the reliability analysis of a Turbine Engine Nozzle [Volume 15, Issue 1, 2025, Pages 50-66]
Turning Application of Design of Experiments and Grey Analysis to Optimize the Surface Roughness Quality of AISI 4340 Steel in Turning Using TiN Tools [Volume 2, Issue 2, 2012, Pages 71-77]
Two-parameter Riley distribution Bayesian Inference Parameter Reliability in Two-Parameter Riley Distribution under Increasingly Censored Bond Samples [Volume 10, Issue 2, 2020, Pages 159-168]
Type-2 Fuzzy Sign Chart Developing the Sign and Signed Rank Non-parametric Control Charts by Using Interval Type-2 Fuzzy Sets [Volume 12, Issue 3, 2022, Pages 251-272]
Type-2 Fuzzy Signed Rank Chart Developing the Sign and Signed Rank Non-parametric Control Charts by Using Interval Type-2 Fuzzy Sets [Volume 12, Issue 3, 2022, Pages 251-272]

U

Ultrahigh dimensional Bayesian Shirinkage Variable Selection with Non-Local Priors in Ultrahigh-Dimensional Logistic Generalized Linear Models [Volume 12, Issue 2, 2022, Pages 103-124]
Uncertainty Viability Assessment Model of Complex Engineering Systems in Uncertainty - A Case Study of a Satellite [Volume 7, Issue 3, 2017, Pages 208-222]
Uncertainty Designing a Closed Loop Supply Chain Network Considering the Uncertainty in the Quality of Returning Products and solving it with Lp-Shape Scenario Reduction Algorithm [Volume 8, Issue 4, 2018, Pages 292-309]
Uncertainty Developing a multi-objective mathematical model of green closed-loop supply chain In terms of selling returned products using the Epsilon-constraint method approach [Volume 11, Issue 4, 2021, Pages 351-376]
Uncertainty Structural design of submarine pressure hull based on uncertainty and reliability methods [Volume 14, Issue 1, 2024, Pages 79-90]
Uncertainty Optimization of a Closed-Loop Viable Supply Chain Network under Hybrid Uncertainty [(Articles in Press)]
Unified hybrid censoring Bayesian Prediction for Censored Data from the Kumaraswamy Distribution based on Constant-Stress Accelerated Life Test Model and Its Application in Ceramic Materials [Volume 11, Issue 1, 2021, Pages 15-32]
Unit Ranking Evaluating the Efficiency of petrochemical companies based on human resource, operations and sales functions using Data Envelopment Analysis (DEA) approach [Volume 10, Issue 3, 2020, Pages 259-267]
Universal Generating Function Extended Block Diagram Method for Evaluating the Reliability of Multi-State System with Dependent Components [Volume 8, Issue 2, 2018, Pages 75-85]
Universal Generating Function (UGF) algorithm Multi-state series–parallel system optimization using the genetic algorithm [Volume 5, Issue 1, 2015, Pages 13-22]
Unsafe Behavior A Statistical Process Control Model for Monitoring Factors Affecting Unsafe Behaviors [Volume 2, Issue 3, 2012, Pages 116-122]
Urology unit Developing a Discrete-Eevent Simulation Model for Improving the Quality of Services: A Case Study in Urology Unit at a Kidney Center [Volume 9, Issue 3, 2019, Pages 244-260]
Utility function A semi-parametric method for optimizing multi-response problems: A case study on improving the quality of plastic injection machines [Volume 7, Issue 1, 2017, Pages 16-28]
Utility function Correlated Multi-Objective Optimization: Application to the Separation of Perindopril [Volume 2, Issue 1, 2012, Pages 9-14]
Utility function Robust Design Optimization for Time-Based Quality Indices Using the Utility Function [Volume 2, Issue 2, 2012, Pages 78-88]

W

Warranty Designing a Model for Estimating the Cost of Pro-Rata Warranty with limitation of Each Failure Rectification Cost under Inflationary Conditions [Volume 9, Issue 1, 2019, Pages 72-79]
Warranty ‎ Making optimal decisions of quality level, warranty period and ‎advertising in a two-level supply chain [Volume 12, Issue 2, 2022, Pages 221-250]
Warranty Determining the optimal time policy model for the products with multiple failure states by considering a mixture distribution [Volume 15, Issue 2, 2025, Pages 137-147]
WASPAS Prioritizing factors affecting the quality of managerial decision-making [Volume 15, Issue 1, 2025, Pages 1-19]
Waste Productivity improvement through kaizen approach in home ‎appliance industry [Volume 13, Issue 2, 2023, Pages 131-146]
Wastewater Optimization of the process of removal of acidic blue dye -74 from textile wastewater with modified nanozeolite [Volume 11, Issue 2, 2021, Pages 155-176]
Weibel distribution A new method for modeling the reliability of mechanical systems with vanilla-shaped failure rates based on censored and accelerator tests [Volume 6, Issue 3, 2016, Pages 204-212]
Weibel distribution The effect of random percentage of defective items on product reliability [Volume 7, Issue 4, 2017, Pages 246-270]
Weibull distribution Reliability analysis and failure rate assessment (Case study: Heat Exchanger) [Volume 11, Issue 1, 2021, Pages 61-76]
Weibull distribution Proposing a framework for reliability estimation using a proportional hazards model based on diesel engine condition monitoring data [Volume 14, Issue 1, 2024, Pages 1-17]
Weibull distribution Estimation of Weibull distribution parameters using a genetic algorithm [Volume 15, Issue 4, 2025, Pages 415-432]
Weibull shock model Statistical-economic design of X ̅ control diagram for correlated data under generalized shock and Weibull models [Volume 7, Issue 3, 2017, Pages 200-207]
Weibull shock model Stattistical Design of X ̅ Control Chart With Variable Sample Size Under Weibull Shock Model With Non-Uniform Sampling Intervals [Volume 11, Issue 3, 2021, Pages 221-241]
Weibull shock model Realistic economic-statistical design of X ̅ control chart in the presence of independent assignable causes: A critique of Chen and Yang (2002) economic model [Volume 11, Issue 3, 2021, Pages 203-220]
Weibull Shock Model. Economic-Statistical Design of ̅X Control Chart for Monitoring of Process Mean based on Ranked Set Sampling [Volume 8, Issue 3, 2018, Pages 224-233]
Weighted networks Developing Control Charts for Statistical Monitoring of a Dynamic Network of Emergency Service [Volume 11, Issue 4, 2021, Pages 377-392]
Wind tunnel turbine A Developed Framework for Estimating the Equipment' Health Indicator: A Study for Wind Tunnel Equipment [Volume 12, Issue 4, 2022, Pages 413-438]
Within Profile Autocorrelation Monitoring Auto-Correlated Multivariate Simple Linear Profiles in Phase I under AR(1) and MA(1) Models [Volume 8, Issue 1, 2018, Pages 1-7]
Work unit excellence Designing a conceptual model for evaluating the excellence of work units in organizations [Volume 7, Issue 2, 2017, Pages 114-128]
World class The use of quality benchmarking deployment to achieve world-class performance in pharmaceutical services for rare diseases [Volume 15, Issue 3, 2025, Pages 258-270]

Journal of Quality Engineering and Management

Home

Editorial Board

Indexing and Abstracting

Guide for Authors

Submit Manuscript

Reviewers

Contact Us

Keyword Index

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Z

Journal of Quality Engineering and Management

Home

Browse

Journal Info

Editorial Board

Indexing and Abstracting

Guide for Authors

Submit Manuscript

Reviewers

Contact Us

Keyword Index

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Z